|
BAL-TEC
RES-010 |
Benchtop Rapid Etching System.
Dual ion guns.
Turbo and roughing pumps.
Microscope for viewing sample.
Etching process monitor..
$4,950 |
View Details and Photo
|
|
BARNSTEAD
ST75935/L |
Steam Sterilizer.
Easy to read LCD display lets you view sterilization and diagnostic programs.
Chamber Dimensions: 12 in. dia. x 18 in. D.
Built in printer.
120V, 50/60 Hz, 12.5A..
$2,950 |
View Details and Photo
|
|
BARRINGER
SABRE 2000 |
Hand Held Trace Detector.
Small lightweight portable package with the capability of detecting narcotics,
explosives and chemical warfare agents.
Can process both vapor and particle samples, which maximizes its detection
capabilities for a wide range of target substances.
120V, 60 Hz, CE..
$9,500 |
View Details and Photo
|
|
BASE PLATE
|
20 in. dia. base plate with multiple feedthroughs.
Bottom Flange: 8 in. ASA..
$850 |
View Details and Photo
|
|
BAY VOLTEX
FT-0805-WC-SS-G |
Heat Exchanger.
Cooling Capacity: 8000 btu at 20 deg C..
$950 |
View Details and Photo
|
|
BAY VOLTEX
HRE-HT-0650-G |
High Volume Heat Exchanger.
Digital temp. readout.
Capacity: 2 kW at 6 Deg. C DT.
Pump Capacity: 4 gpm.
208/230V, 3Ph, 50/60 Hz.
.
$2,500 |
View Details and Photo
|
|
BAY VOLTEX
HRE-HT-6850-E1-E4-H1 |
Heat Exchanger.
Water to water heat exchanger.
Digital controller.
Cooling Capacity: 20,000W.
208V, 1 Ph, 60 Hz, 10A, CE..
$2,500 |
View Details and Photo
|
|
BAY VOLTEX
LT-1650-WC-SX-DI-AM |
Dual Channel Chiller/Heat Exchanger.
One channel: 5 kW of cooling at -15 deg C to 100 deg C.
One channel: 14 kW of cooling at 20 deg C.
Requires house water for heat exchanger.
Built in compressor.
Removed from Applied Materials System.
208V, 3 Ph, 50/60 Hz, 40A..
$3,250 |
View Details and Photo
|
|
BAY VOLTEX
LT-HRE-1650-4850 |
Dual Channel Chiller/Heat Exchanger.
Combination chiller and heat exchanger for Applied Materials etch and CVD.
Coolant: Ethylene Glycol/DI Water.
Flow Rate: 3-4 gpm at 60 psi.
Requires house water.
One channel with built in compressor and cooling at -15 deg C to +10 deg C, 5 kW.
One channel heat exchanger: 14 kW.
208/230V, 3 Ph, 50/60 Hz, 30A..
$3,250 |
View Details and Photo
|
|
BAY VOLTEX
LT-HRE-1650-9650 |
Combined Chiller and Heat Exchanger for Applied Materials Etch and CVD.
Chiller unit 5 kW with temp. of -15 deg C to +10 deg C.
Heat exchanger 28 kW with temp. of 20 deg C to 40 deg C.
Flow rate of 4 gpm at 60 psi.
Requires house water.
208/230V, 3 Ph, 50/60 Hz, 30A.
.
$3,250 |
View Details and Photo
|
|
BECKMAN COULTER
CEQ 8000 |
Genetic Analysis System.
Automatic sample denaturation and introduction. Automatic gel replenishment.
Single setup for both DNA sequencing and fragment analysis.
Performance maximizing linear polyacrylamide(LPA).
8 samples read in parallel.
100/240V, 50/60 Hz, CE.
Mfg.: 5/2000..
$16,000 |
View Details and Photo
|
|
BECKMAN COULTER
SA 3100 W/L |
Surface Area and Pore Size Analyzer.
Easy to read screen complete with simple touch pad operation.
Totally self contained vacuum system.
Surface area measurement range nitrogen and krypton from 0.01 to >2000 m2/g.
Pore size range: 2 to >200nm dia.
100/240V, 1 Ph, 50/60 Hz. CE..
$7,500 |
View Details and Photo
|
|
BEDE
QC200 Type B |
High Resolution X-Ray Diffractometer.
Compact high resolution double crystal diffractometer.
Horizontal specimen mounting on detachable holders, up to 200mm sample size.
110V, 50/60 Hz.
X-RAY TUBE BAD. NEEDS NEW TUBE. SOLD AS IS..
$12,000 AS IS |
View Details and Photo
|
|
BELL JAR
- |
Open on top and bottom.
11-1/4 in. ID, 12 in. OD, 16 in. tall..
$850 |
View Details and Photo
|
|
BENCHMARK
GEN II |
SM-8000 Parallel Seam Sealer with Generation 2 Atmospheric Enclosure. Sealing System Welds, Brazes and Solder Seals Microelectronics Packages up 8 in. in quadrangular or round mode.
Hermetically welds and solder seals ceramic, stainless steel, Kovar-TM and other metal packages. Positioning accuracy of +/-0.0015 in. (+/- 0.038mm)and repeatability of +/-0.0001 in. (+/- 0.025mm). Speeds of up to 1.5 in./sec (38mm/sec.).
Atmospheric enclosure with fully integrated automatic electronic gas pressure control.
Moisture monitors. Turbo pumped vacuum oven. Vacuum Antechamber. Automatic push button inner and outer doors. Proportional gas mixer. Stainless steel interior..
$29,000 |
View Details and Photo
|
|
BENCHMARK
GEN II |
SM-8000 Parallel Seam Sealer with Generation 2 Five Glove Atmospheric Enclosure and Dual Ovens.
Welds brazes and solder seals microelectronic packages up to 8 in. in quadrangular or round mode.
Hermetically welds and solder seals ceramic, stainless steel, Kovar-TM and other metal packages.
Moisture monitor. Proportional gas mixer.
Gow-Mac thermal conductivity gas analyzer for percent helium in nitrogen.
Vacuum pumps on both vacuum ovens..
$29,000 |
View Details and Photo
|
|
BENCHMARK
SM-8000 |
Seam Sealer Unit.
No computer or controller, just sealing unit..
$3,250 |
View Details and Photo
|
|
BENCHMARK
SM-8000 |
Seam Sealer Welder without Computer.
Welder removed from glove box, does not include PC controller..
$3,250 |
View Details and Photo
|
|
BETTCHER
48FRPPPA |
Chemical Process Wet Bench.
System has robot transfers for baths but no cassette holder.
2 - Quick Dump Rinse: 10 in. L x 11 in. W x 10-1/2 in. H.
Bath: 12 in. L x 11 in. W x 11 in. H.
Cascade Bath: 11 in. L x 11 in. W x 10 in. H.
220V, 1 Ph, 60 Hz..
$12,500 |
View Details and Photo
|
|
BIO-RAD
FLUOR-S MultiImager |
No PC or software with system.
Quantitative imaging systems for capturing high resolution digital images from single and
multi-color fluorescence, chemiluminescence, chemifluorescence and colorimetric samples.
100/240V, 50/60 Hz, CE..
$6,500 |
View Details and Photo
|
|
BIO-RAD
Model 583 |
Gel Dryer.
Designed to dry sequencing and protein gels fast. User programmable.
Microprocessor controlled temperature.
120V, 60 Hz..
$495 |
View Details and Photo
|
|
BIO-TEK INSTRUMENTS
EL 340 |
Microplate Reader, Ultra-Kinetics. Single; measures absorbance in wells using single filter,
or dual wavelength; measures difference between aborbances using two different filters, gives more accurate measurements. Temperature controlled incubation, with programmable software cartridge.
.
$2,950 |
View Details and Photo
|
|
BIO-TEK INSTRUMENTS
EL 340 |
Automated Microplate Reader.
Designed to measure the optical density of solutions in 96-well microplates.
Single or dual wavelength selection.
Wavelength Range: 340 nm to 750 nm.
Manuals and software with unit.
100/240V, 1 Ph, 60 Hz..
$2,950 |
View Details and Photo
|
|
BIO-TEK INSTRUMENTS
EL 403 |
Microprocessor Controlled Microplate Washer.
Accommodates all 96 well microplates.
Wash/Aspirate 96 wells simultaneously in 8 secs.
110/240V, 50/60 Hz..
$950 |
View Details and Photo
|
|
BK PRECISION
1405 |
Polar Display 5 MHz Single Trace.
10 mV/div sensitivity. High brightness CRT. Can be externally synced.
Direct deflection display. Z axis input..
$200 |
View Details
|
|
BOC EDWARDS
HTU-108 |
DI Water Heat Exchanger.
High performance heat exchanger for multiple high heat load process module applications.
Reservoir Capacity: 28 gal.
Cooling Capacity: 100,000W.
30 gpm DI water capacity, 8 Channels.
208V, 3 Ph, 50/60 Hz, 15A, CE Marking.
.
$4,950 |
View Details and Photo
|
|
BOC EDWARDS
HTU-108D |
DI Water Heat Exchanger.
High performance heat exchanger for multiple high heat load process module applications.
Includes DeviceNet interface. Reservoir Capacity: 28 gal.
Cooling Capacity: 100,000W.
Pump Capacity: 3.5 gpm at 35 psig (30 gpm DI water capacity).
Microprocessor-based controller.
208V, 3 Ph, 50/60 Hz, 15A, 8 channels for process modules and auxiliary equipment cooling..
$5,250 |
View Details and Photo
|
|
BOC EDWARDS
IGRC |
Exhaust Gas Management System. Dry abatement technology for etch exhausts. Inline gas reactor column. Uses unique hot bed reactor technology.
Provides treatment by chemical reaction to stable inert salts and treats the widest range of gases from halogens and acids to CIF3, NF3, SF6 and other halide etch compounds. Used columns. 208V, 3 Ph, 60 Hz..
$11,000 |
View Details and Photo
|
|
BOEKEL
DRY BOX |
Stainless steel frame.
Outside Dimensions: 12 in. L x 10 in. W x 12 in. H..
$250 |
View Details and Photo
|
|
BOEKEL GRANT
GA 100L |
Heated Bath.
Analog control.
Max. Temp.: 99 deg C.
Work Area: 12 in. L x 16 in. W x 5 in. D.
Plastic tank.
115V, 60 Hz, CE..
$350 |
View Details and Photo
|
|
BOLD TECHNOLOGIES
BATCH DEVELOPER |
Batch Developer Wet Bench with Robot Transfer.
Previously processed cassettes of 6 in. wafers. System has 2 robot transfer arms.
Each arm transfers a single cassette of 6 in. wafers from a temperature controlled bath to a quick dump rinse bath.
Bath temperature controlled by an external chiller.
Overall Dimensions: 61 in. L x 63 in. W x 77 in. H..
$17,500 |
View Details and Photo
|
|
BOLD TECHNOLOGIES
WET BENCH |
Develop System with Robot Transfer.
Previously used for 6 in. wafers. System has 2 robot transfer arms.
Each arm transfers a single cassette of 6 in. wafers from a quick dump rinse bath to a temperature controlled bath.
Bath temperature controlled by external chiller.
Overall Bench Dimensions: 61 in. L x 55 in. W x 79 in. H..
$17,500 |
View Details and Photo
|
|
BRANSON
BENCHMARK |
Aqueous/Semi-Aqueous Precision Ultrasonic Cleaning System.
First Tank/Heated Ultrasonic: 16 in. L x 24 in. W x 16 in. H .
Second Tank/Cascaded Heated Ultrasonic: 16 in. L x 20 in. W x 16 in. H.
Dryer section with 12 in. L x 18 in. W x 24 in. H Forced Air Dryer.
40 kHz Series 8000 ultrasonic power supplies..
$17,500 |
View Details and Photo
|
|
BRANSON
CASCADE BATH |
Stainless Steel Heated Cascading Bath.
Heated stainless tank with Weir style overflow.
Inside Dimensions: 10 in. L x 12 in. W x 9 in. D.
120V, 60 Hz, 8.5A..
$850 |
View Details and Photo
|
|
BRANSON
MU 2112-40-24S |
Ultrasonic Tank.
Tank only, no controller.
24 element 40 kHz.
Inside Dimensions: 21 in. L x 12 in. W x 14 in. H..
$1,950 |
View Details and Photo
|
|
BRANSON/IPC
3000 |
Low Temperature Asher/Etcher.
Quartz process chamber 10 in. dia. x 20 in. deep.
PM-112 13.56 MHz RF Generator.
With corrosive series vacuum pump..
$16,000 |
View Details and Photo
|
|
BRANSON/IPC
S2005 |
Low Temperature Asher.
Three gas inputs for three seperate processes or programs.
PM119 500W, 13.56 MHz RF Generator.
Quartz reaction chamber 10 in. dia. by 20 in. L.
Corrosive Series vacuum pump..
$17,500 |
View Details and Photo
|
|
BRANSON/IPC
S2005-11020 |
Plasma Etcher/Stripper.
Single button initiates routine processing. Three gas inputs.
Quartz process chamber: 10 in. dia. x 20 in. D.
For batch wafer process.
PM119 13.56 MHz RF Generator.
Includes vacuum pump..
$15,000 |
View Details and Photo
|
|
BRANSON/IPC
S2100-11220 |
Low Temperature Plasma Asher.
11 in. dia. quartz process chamber.
PM112 1000W, 13.56 MHz RF generator.
Auto or manual modes.
Includes vacuum pump..
$15,000 |
View Details and Photo
|
|
BRANSON/IPC
S2100-11220 |
Low Temperature Plasma Asher.
Uses oxygen and plasma to etch organic films and residues.
3 program process controller.
Quartz Process Chamber: 10 in. dia. x 20 in.
1000W 13.56 MHz RF Generator.
Auto or manual operation modes.
Includes vacuum pump..
$12,500 |
View Details and Photo
|
|
BRANSON/IPC
S3100 |
Low Temperature Plasma Asher.
System generates a low pressure, low temperature gaseous plasma.
Plasma reactions such as ashing, etching and polymer surface modifications can be performed.
11 in. dia. x 19 in. quartz process chamber.
PM112 13.56 MHz RF generator, 1000W. Includes vacuum pump..
$14,950 |
View Details and Photo
|
|
BRIGHT
5030 |
Refrigerated Microtome.
$3,500 |
View Details and Photo
|
|
BRIGHTON
REACTOR |
Stainless Steel Vessel with Air Powered Lightning Mixer.
Max. Work Pressure: 45 psi.
Max Work Temp.: 300 deg F.
28 in. dia. x 30 in. H..
$2,500 |
View Details and Photo
|
|
BROOKS
5851EM |
Mass Flow Controller. 25 SLPM N2. CE.
.
$650 |
View Details and Photo
|
|
BROOKS
5866M |
Pressure Controller.
N2 500 SCCM.
VCR fittings. CE..
$650 |
View Details and Photo
|
|
BROOKS
Mass Flow Controllers |
We have over 1,000 Mass-Flow-Controllers in stock from Brooks, Precision Control, Tylan and Unit Instruments.
All items are used and untested, but come with a 30 day Right-of-Return.
Please click on photo link to see an image of our Mass Flow Controllers listings and pricing!.
$325 each |
View Details and Photo
|
|
BROOKS AUTOMATION
001-7500-02 |
Vacuum Transfer Robot.
With Techware controller and keypad.
No cables with system..
$5,500 |
View Details and Photo
|
|
BRUCE
BDF 4/4 |
4 Stack SACVD Tube Furnace.
Gas jungle.
Bruce Model 7351C controller.
Model 2950510 tubes 1300 deg. C max.
440/460V, 3 Ph, 60Hz, 175A.
Pumps not included.
Call For Details..
$39,000 |
View Details and Photo
|
|
BRUEL & KJAER
2144 |
Dual Channel Real-Time Frequency Analyzer.
Preamplfier and direct inputs with twelve range from 10mV to 3.16V in 5 dB steps.
Frequency response .7 Hz to 22.4 kHz single channel or .7 Hz to 11.2 kHz dual channel.
Accelerometer input with 18 ranges from 1 pC to 17.8 nC in 5 db steps.
Frequency response .35 Hz to 22.4 kHz.
Single channel or .7 Hz to 11.2 kHz dual channel.
Four digital filters 1/1, 1/3, 1/12 - 1/24 octave.
IEEE 488 and RS232 interfaces. LCD display.
Opt ion 3108 two channel generator module..
$1,850 |
View Details and Photo
|
|
BTU
VIP98N |
PC Controlled 7 Zone Belt Furnace.
Max. Temp.: 300 deg C.
Dual track edge conveyor. Belt width: 22 in.
Product clearance above belt: 2 in.
Heated length: 98 in.
Furnace atmosphere: N2/air.
Overall furnace length: 18 ft.
480V, 3 Ph, 50/60 Hz..
$25,000 |
View Details and Photo
|
|
BUCHI
EL 131 |
Rotavapor with 461 Water Bath.
Does not have complete set of glassware..
$1,100 |
View Details and Photo
|
|
BUEHLER
DUOMET II |
Belt Surfacer for Two Step Coarse Grinding.
Built in flushing systems.
1/2 hp heavy duty motor.
Two belt system 4 in. x 9 in. grinding area.
115V, 60 Hz, 10.8A, CE..
$2,750 |
View Details and Photo
|
|
BUEHLER
FIBRMET |
Portable Optical Fiber Polisher.
Quick and accurate means for polishing optical fiber ends to maximize light transmission.
No travel cover with unit.
115V, 60 Hz.
$1,950 |
View Details and Photo
|
|
BUEHLER
FIBRMET |
Portable Optical Fiber Polisher.
Quick and accurate means for polishing optical fiber ends to maximize light transmission.
No travel cover with unit.
115V, 60 Hz..
$1,950 |
View Details and Photo
|
|
BUEHLER
FIBRMET |
Portable Optical Fiber Polisher.
Quick and accurate means for polishing optical fiber ends to maximize light transmission.
No travel cover with unit. 115V, 60 Hz..
$1,950 |
View Details and Photo
|
|
BUEHLER
FIBRPOL |
Optical Fiber Polishing System.
Volume polishing of optical fiber and connectorized cable.
Semiautomatic system has the capability to simultaneously polish up to 40 optical fiber connectors.
115V, 60 Hz, 11A..
$3,750 |
View Details and Photo
|
|
BUEHLER
HANDIMET II |
Roll Grinder for Fine Grinding of Metallographic Specimens.
Efficient four-stage fine grinding with controlled water flow for lubrication and flushing.
Four 3-7/16 in. x 11-1/2 in. grinding surfaces. No moving parts..
$750 |
View Details and Photo
|
|
BUEHLER
MICROMET II |
Digital Micro Hardness Tester.
Digital readout provides instant diagonal measurements of the indentations and resultant hardness values.
120V, 60 Hz..
$8,500 |
View Details and Photo
|
|
BUEHLER
POLIMET I |
Triple Wheel Polishing Table.
Table with three Polymet polisher/grinders.
Each polisher/grinder with independent controls. 8 in. bronze wheels with infinitely variable speeds.
100 to 1200 rpm and tachometer reading.
Two rinse sinks. Table length: 72-1/2 in.
115V, 60 Hz, 30A..
$5,950 |
View Details and Photo
|
|
BUEHLER
POLIMET I |
Dual Wheel Polishing Table. Table with two Polymet polisher/grinders. Each polisher/grinder with independent controls. 8 in. bronze wheels with infinitely variable speeds. 100 to 1200 rpm and tachometer reading. Single rinse sink. Table length: 52-1/2 in. 115V, 60 Hz, 20A..
$4,500 |
View Details and Photo
|
|
BURLEIGH
HI Fase 800-1 |
Etalon System.
760-840 nm. Only what is in the photo.
No power supply or cables.
Cannot test unit but will give the 30 day money back option..
$950 |
View Details and Photo
|
