Click here to visit the main Bid-Service Website

The world leader in used high-technology equipment

Your one source for fully reconditioned used Laboratory, Test, Semiconductor Processing and Scientific Equipment

Search!

Sorry you need Java!

A large in-stock inventory to meet your needs!

Phone: 732-863-9500
FAX: 732-863-1255
Email:
Sales

Have equipment
sitting idle?

We're always
in the market for quality high-tech equipment!

Click Here!

Mfg by First Letter: A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z 0-9

A few of the manufacturers in stock: Advanced Energy, AMI-Presco, Applied Materials, Anritsu, Balzers, Bausch & Lomb, Blue-M, CTI, Dage, Disco, Ebara, Edwards, ENI, ESI, Fluke, Hitachi, HP, Inficon, Instron, K&S, Keithley, Kepco, Lambda, Lauda, Leica, Leitz, Leybold, Micromanipulator, MKS, MRC, Nanometrics, Neslab, Nikon, Olympus, Perkin Elmer, Prometrix, Reichert, Rucker & Kolls, SemiGas, Semitool, Signatone, Sorensen, SSEC, STI, Strasbaugh, SVG, Tegal, Tektronix, Temescal, Tencor, Varian, Veeco, Verteq, West Bond, Wild, Yield, Zeiss

Inventory in Stock, Manufacturer C
No CTI

Click here for CTI

 
Manufacturer/Model Description

Info


CADCAM TECHNOLOGY  FB 750 Laser Cutting System. PC with CadCam software. Variable cutting speeds from 10 mm/s to 600 mm/s. High precision stepless laser cutting. 50W laser with 33 in. bed. A fine, clean, accurate depth of cut is achieved by software control of power output and cutting speed. Can even etch onto paper. Cuts plastics, paper, wood, leather, fabrics, reflective and retro-reflective materials. Mfg. 8/04. TESTED AND READY TO SHIP! This used Cadcam Technology FB 750 Laser Cutting System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Cadcam Technology FB 750 Laser Cutting System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Cadcam Technology FB 750 Laser Cutting System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $17,500 View Details and Photo
CAM/ALOT  1414 Liquid Dispensing Machine. The system can be configured for a variety of SMT applications and is an excellent tool for R&D and process calibration. Dispensing area: 14 in. x 14 in. Lead screw drives on all three axes. Travel X & Y Axes: 14 in. (350mm). Travel Z Axis: 2 in. (50mm). Resolution: .001 in. (25m). Repeatability: +/-.002 in. (+/-50m). Speed: 10 IPS (250mm/sec). Dispensing rate: 13,000 dots/hr. Dot placement accuracy: +/-.003 in. (+/-75m) at 3 Sigma. 115V, 60Hz, 10A. Has camera option, NO PC or software. Sold AS IS.. $950 AS IS View Details and Photo
CAMELOT  CAM/ALOT 3700 In-Line Dispensing System. Smooth, precise and accurate dispensing with an easy to use enhanced graphic user interface. Elevator input and output modules. Max. dispense area: X-14 in. Max. Z travel: 2 in. Max. Y: 14 in. Dot placement accuracy: +/-0.003 in. This used Camelot CAM/ALOT 3700 In-Line Dispensing System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Camelot CAM/ALOT 3700 In-Line Dispensing System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Camelot CAM/ALOT 3700 In-Line Dispensing System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $25,000 View Details and Photo
CAMELOT SYSTEMS  CAMALOT 3800 Fluid Dispensing System for SMT Applications. System utilizes ball screw and servo motors on all three axes to assure smooth, precise and accurate dispensing with an easy to use enhanced graphic user interface. Speedline 1230 automatic load and unload stations. Large 14 in. x 14 in. dispense area. Dual dispense heads. Camera. Adjustable conveyor width. Dispense up to 25,000 dots of solder paste or SMD epoxy per hour. This used Camelot Systems Camelot 3800 Fluid Dispensing System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Camelot Systems Camelot 3800 Fluid Dispensing System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Camelot Systems Camelot 3800 Fluid Dispensing System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $49,000 View Details and Photo
CANON  GAP SET TOOL Used on Canon PLA-501 Series mask aligners. This used Canon Gap Set Tool will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Canon Gap Set Tool is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Canon Gap Set Tool will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $1,950 View Details and Photo
CANON  PLA-501F Parallel Light Mask Aligner. The Canon PLA-501F is a cassette to cassette mask aligner which can be used manually or in automode. Printing Methods: Proximity, hard contact or soft contact. Cycle time approx. 30 sec. Illuminator Ushio 250W superhigh pressure mercury lamp. Currently configured for 3 in. wafers. This used Canon PLA501F Parallel Light Mask Aligner will be sold refurbished and fully tested to meet the original manufacturers specifications unless it is listed in AS IS condition. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Canon PLA501F Parallel Light Mask Aligner is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Canon PLA501F Parallel Light Mask Aligner will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $25,000 View Details and Photo
CANON  PLA-501F Mask Aligner. More information to come contact us for details.. $- View Details and Photo
CANON  PLA-501F Parallel Light Mask Aligner. The PLA 501A is a cassette to cassette mask aligner, which can be used manually or in auto mode. Printing Method: 1. Proximity, 2. Hard Contact, 3. Soft Contact Cycle Time: Approx. 30 sec. (setting alignment time 10 sec, exposure time 1 sec.). Illuminator: USHIO 250W super high pressure mercury lamp. This used Canon PLA-501F Parallel Light Mask Aligner will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Canon PLA-501F Parallel Light Mask Aligner is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Canon PLA-501F Parallel Light Mask Aligner will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $25,000 View Details and Photo
CANON  PLA-501F Neutronix Remanufactured Manually Loaded Mask Aligner. Parallel light mask aligner. Can be configured for proximity or contact alignment. 4-1/4 in. x 4-1/4 in. square vacuum chuck. Manual load station for wafers up to 4 in. dia. 250W lamp. 115V, 60 Hz. This used Canon PLA-501F Neutronix Remanufactured Manually Loaded Mask Aligner will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Canon PLA-501F Neutronix Remanufactured Manually Loaded Mask Aligner is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Canon PLA-501F Neutronix Remanufactured Manually Loaded Mask Aligner will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $25,000 View Details and Photo
CASCADE MICROTECH  101850 Probe Card Holder for Summit 9000 Prober. $500 View Details and Photo
CASCADE MICROTECH  DCM 200 Vacuum Base Precision Probe Manipulator. Precision probe micropositioning. Micron placement accuracy. X-Y and Z axis adjustment. This used Cascade Microtech DCM 200 Vacuum Base Precision Probe Manipulator will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Cascade Microtech DCM 200 Vacuum Base Precision Probe Manipulator is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Cascade Microtech DCM 200 Vacuum Base Precision Probe Manipulator will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $1,650 View Details and Photo
CASCADE MICROTECH  DCM 200 Vacuum Base Probe Manipulator. Does not have probe holder. Precision X-Y and Z axis movement. This used Cascade Microtech DCM 200 Vacuum Base Probe Manipulator will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Cascade Microtech DCM 200 Vacuum Base Probe Manipulator is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Cascade Microtech DCM 200 Vacuum Base Probe Manipulator will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $1,000 View Details and Photo
CASCADE MICROTECH  DCM 200 Two Precision Probe Manipulators Mounted on a Single Vacuum Based Carrier. Precision probe micropositioners each with X-Y and Z axis adjustment. This used Cascade Microtech DCM 200 Two Precision Probe Manipulators Mounted on a Single Vacuum Based Carrier will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Cascade Microtech DCM 200 Two Precision Probe Manipulators Mounted on a Single Vacuum Based Carrier is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Cascade Microtech DCM 200 Two Precision Probe Manipulators Mounted on a Single Vacuum Based Carrier will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $3,000 View Details and Photo
CASCADE MICROTECH  DCM 200 Vacuum Base Precision Probe Micropositioner. Micron placement accuracy. X-Y and Z axis adjustment. This used Cascade Microtech DCM 200 Vacuum Base Precision Probe Micropositioner will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Cascade Microtech DCM 200 Vacuum Base Precision Probe Micropositioner is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Cascade Microtech DCM 200 Vacuum Base Precision Probe Micropositioner will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $1,650 View Details and Photo
CASCADE MICROTECH  FPD-100 Vacuum Based Dual Probe Holder. These tools are for mounting two of the Cascade DCM 200 manipulators together on vacuum base for easy mounting and removal. This used Cascade Microtech FPD-100 Vacuum Based Dual Probe Holder will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Cascade Microtech FPD-100 Vacuum Based Dual Probe Holder is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Cascade Microtech FPD-100 Vacuum Based Dual Probe Holder will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $500 each View Details and Photo
CASCADE MICROTECH  MH4-B Magnetic Base Precision Probe Micropositioner. Micrometers for X-Y-Z axis adjustment. This used Cascade Microtech MH4-B Magnetic Base Precision Probe Micropositioner will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Cascade Microtech MH4-B Magnetic Base Precision Probe Micropositioner is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Cascade Microtech MH4-B Magnetic Base Precision Probe Micropositioner will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $1,000 View Details and Photo
CASCADE MICROTECH  MPH Vacuum Base Precision Probe Manipulator. Precision probe micropositioner. This used Cascade Microtech MPH Vacuum Base Precision Probe Manipulator will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Cascade Microtech MPH Vacuum Base Precision Probe Manipulator is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Cascade Microtech MPH Vacuum Base Precision Probe Manipulator will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $1,250 View Details and Photo
CASCADE MICROTECH  MPH Vacuum Base Precision Probe Manipulator. Precision probe micropositioner. This used Cascade Microtech MPH Vacuum Base Precision Probe Manipulator will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Cascade Microtech MPH Vacuum Base Precision Probe Manipulator is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Cascade Microtech MPH Vacuum Base Precision Probe Manipulator will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $1,250 View Details and Photo
CE INTERNATIONAL  LS-300-NW Vibrosieve Vibratory Separation System. Compact highly efficient and portable. Ideal to use in batch operations to screen and scalp powders, granules or liquids in different locations. 300 mm screen size. 110V, 60 Hz. This used CE International LS-300-NW Vibrosieve Vibratory Separation System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand CE International LS-300-NW Vibrosieve Vibratory Separation System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used CE International LS-300-NW Vibrosieve Vibratory Separation System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $950 View Details and Photo
CEE  3000 Automated Precision Hot Plate. Digital program controller. Automated wafer transfer system for complete hands off wafer processing. Temp. Range: 50 to 300 deg C with uniformity across work surface of +/- 0.3 percent. 220V, 1 Ph, 60 Hz. This used CEE 3000 Automated Precision Hot Plate will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand CEE 3000 Automated Precision Hot Plate is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used CEE 3000 Automated Precision Hot Plate will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $15,000 View Details and Photo
CENTECH  VP-500 Benchtop Condensation Inert Heating System. Single vapor, batch type, semiautomatic system provides uniform heat to attain high quality reflow, curing, drying and attaching. Pallet Size: 9 in. L x 6 in. W x 1.5 in. H. Top and bottom ceramic preheat panel can operate to 482 deg C. Operating Temp.: 175 to 265 deg C depending upon fluid used. 208V, 1 Ph, 60 Hz.. $3,500 View Details and Photo
CERAMIC TUBE  - Tube for use in furnace. 6 in. OD, 5-1/2 in. ID, 72 in. L. This used Ceramic Tube for use in furnace will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Ceramic Tube for use in furnace is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Ceramic Tube for use in furnace will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $500 View Details and Photo
CHA  SE-1000-RAP Multisource E-Beam and Thermal Evaporation System for Optical Films and Oxygen Reactive Evaporations. Inficon IC-4 Plus rate and deposition controller. Six pocket electron beam source with SR-10 E-Beam power supply. Parts for optical monitor with system but not tested or warranted. Two outrigger style filament resistance sources with 6 kW SCR controlled power supply. Automatic valve sequence controller. 25 in. dia. x 30 in. tall water cooled bell jar. Pressure control system for oxygen reactive evaporations. VHS-10 high speed diffusion pump with roughing pump. Quartz substrate heaters. Slide type fixturing for lift off process. Does not use substrate rotation type fixturing. This used CHA SE-1000-RAP Multisource E-Beam and Thermal Evaporation System for Optical Films and Oxygen Reactive Evaporations will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand CHA SE-1000-RAP Multisource E-Beam and Thermal Evaporation System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used CHA SE-1000-RAP Multisource E-Beam and Thermal Evaporation System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $85,000 View Details and Photo
CHA  SEC-1000-RAP Dual Gun E-Beam Evaporator. Two single pocket e-guns with individual power and sweep control. Inficon IC4 Plus deposition rate monitor. Temescal CV-8 E-beam power supply. Auto-Tech II valve controller. Single substrate carrier with rotation control. 25.5 in. diameter water cooled stainless steel bell jar. CTI cryopump with compressor and roughing pump. This used CHA SEC-1000-RAP Dual Gun E-Beam Evaporator will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand CHA SEC-1000-RAP Dual Gun E-Beam Evaporator is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used CHA SEC-1000-RAP Dual Gun E-Beam Evaporator will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $75,000 View Details and Photo
CHA  SEC-600-RAP E-Beam Evaporator. High vacuum electron beam deposition system. 19 in. dia. water cooled bell jar. 6 pocket e-gun with SR-10 power supply and sweep controls. Inficon IC/4 crystal deposition monitor. CTI on board cryopump with compressor and roughing pump. Auto-Tech II vacuum controller. Fixture rotation controller and motor but does not include substrate fixturing. Heater power supply but no heaters currently installed. This used CHA SEC-600-RAP E-Beam Evaporator will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand CHA SEC-600-RAP E-Beam Evaporator is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used CHA SEC-600-RAP E-Beam Evaporator will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $69,000 View Details and Photo
CHA  SS-600 Two Target Thin Film Sputtering System. Inficon IC/5 crystal deposition controller. Advanced Energy RFX-1250 1250W 13.56 MHz RF generator with a matching network for each RF cathode. Three gas inputs controlled via MKS and Model 247 4 channel controller. Water cooled 19 in. bell jar. Water cooled substrate holders. Three independent holders each for up to 4 in. dia. substrate rotate under cathodes. CTI cryopump with compressor and roughing pump. Two 6 in. dia. cathodes. 208V, 3 Ph, 60 Hz. This used CHA SS-600 Two Target Thin Film Sputtering System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand CHA SS-600 Two Target Thin Film Sputtering System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used CHA SS-600 Two Target Thin Film Sputtering System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $59,000 View Details and Photo
CHARLES ROSS  2GAL DIS 2 Gallon Discharge System. Does not have platen with system. This used Charles Ross 2GAL DIS 2 Gallon Discharge System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Charles Ross 2GAL DIS 2 Gallon Discharge System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Charles Ross 2GAL DIS 2 Gallon Discharge System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $1,250 View Details and Photo
CHARLES ROSS  5X12 TRM Three Roll Mill. 5 in. x 12 in. hardened precision ground rolls cored uniform cooling. 230/460V, 3 Ph, 60 Hz. This used Charles Ross 5x12 TRM Three Roll Mill will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Charles Ross 5x12 TRM Three Roll Mill is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Charles Ross 5x12 TRM Three Roll Mill will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $8,500 View Details and Photo
CHARLES ROSS  ME100LX High Speed Disperser Mixing System. Creates a radial flow pattern within a stationary mix vessel. Blade creates a vortex that pulls in the contents of the vessel to the blades sharp edges. Cowles Hi-Shear Impeller, B03A0B. 1 h.p. motor, 4850 rpm. Mixing head is raised and lowered by hand crank. 200/230V, 3 Ph, 50/60 Hz, 7A. This used Charles Ross ME100LX High Speed Disperser Mixing System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Charles Ross ME100LX High Speed Disperser Mixing System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Charles Ross ME100LX High Speed Disperser Mixing System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $4,250 View Details and Photo
CHARLES ROSS  ME110 Mixer Emulsifier. 10 h.p. motor rated at 3600 rpm. Motor controller. Hydraulic lift. 400/480V, 3 Ph, 50/60 Hz. This used Charles Ross ME110 Mixer Emulsifier will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Charles Ross ME110 Mixer Emulsifier is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Charles Ross ME110 Mixer Emulsifier will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $3,250 View Details and Photo
CHARLES ROSS  PRESSURE VESSEL Jacketed Stainless Vessel. 10 in. ID ASA flange. Temp. Range: 10 - 300 degrees F. Jacket Max.: 60 psi. Tank Max.: 100 psi. Tank Size: 55 in. x 32 in. OD.. $2,950 View Details and Photo
CHROM TECH  ISO-2000 Digital HPLC Isocratic Pump.. $950 View Details and Photo
CLIMET  CI-450-0-0-0-1 Portable Clean Room Particle Counter. Lightweight and portable only 14.25 lbs. with battery. Samples: 50 liters per minute. Particle Size Channels: 0.3, 0.5, 1.0, 5.0 micrometers. Date of Mfg.: 2004. 85-260V, 50/60 Hz, 1A, CE. This used Climet CI-450-0-0-0-1 Portable Clean Room Particle Counter will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Climet CI-450-0-0-0-1 Portable Clean Room Particle Counter is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Climet CI-450-0-0-0-1 Portable Clean Room Particle Counter will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $3,500 View Details and Photo
CLIMET  CI-450T-01 Portable Clean Room Particle Counter. Ligthweight and portable only 14.25 lbs. with battery. Samples: 50 liters per minute. Size Sensitivity: 0.30 micrometers. Particle Channel Sizes: 0.3, 0.5, 1.0, 5.0 micrometers. Date of Mfg: 2006. 100-240V, 50/60 Hz, 1A, CE. This used Climet CI-450T-01 Portable Clean Room Particle Counter will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Climet CI-450T-01 Portable Clean Room Particle Counter is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Climet CI-450T-01 Portable Clean Room Particle Counter will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $3,950 View Details and Photo
COLE PARMER  7520-50 Peristaltic Pump. Analog console drive. Easy-Load II pump, uses tubing l/s 13, 14, 16, 25, 17, 18. Max. flow rate: 580 mL/min. Min. flow rate: 0.06 mL/min. 115V, 50/60 Hz, 2.3A.. $850 View Details and Photo
COLUMBIA SCIENTIFIC  CALORIMETER Calorimeter. No computer with system. Sold AS IS with 30 day right to return.. $4,950 AS IS View Details and Photo
COMDEL  CLF-5000 5000W RF Plasma Generator. Output power leveled on delivered power. Fast auto-tune circuitry. Frequency: 450 kHz. Rated Output Power: 5000W into 50 ohm load. Date of Mfg.: 2007. 208V,3 Ph, 50/60 Hz,5A. This used Comdel CLF 5000 5000W RF Plasma Generator will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Comdel CLF 5000 5000W RF Plasma Generator is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Comdel CLF 5000 5000W RF Plasma Generator will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $4,500 View Details and Photo
COMDEL  CPS 1000/4 RF Generator. 4.000 MHz output. Output power up to 1000W. With Match Pro controller. No Matching Network, only control box. Water cooled. 208V, 3 Ph, 50/60 Hz.. $2,950 View Details and Photo
COMDEL  CX-1250S 13.56 MHz 1250W RF Generator. Water cooled. RF output: 13.56 MHz, 1250W, 250 vrms. 50 ohm output. 480V, 3 Ph, 50/60 Hz, CE.. $3,250 View Details and Photo
COMDEL  CXV-2000 Virtual-Quad Series RF Generator. Four complete user interfaces control four separate RF outputs. Output Frequency: 13.56 MHz. RF Outputs: 200W, 100V RMS, 50 ohms each. 208V, 1 Ph, 50/60 Hz, 5A, CE.. $3,950 View Details and Photo
COMMONWEALTH SCIENTIFIC  N2000 PBES Neutralizer Power Supply. 208/220V, 1 Ph, 50/60 Hz, 12A, CE.. $1,250 View Details and Photo
COMPTECH  VQ-6-SM Throttle Valve with Controller. Servo motor driven. ASA flange 11 in. OD, 7.25 in. ID size valve 6. Model 2252-4 throttle valve controller. 110V, 60 Hz. This used Comptech VQ-6-SM Throttle Valve with Controller will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Comptech VQ-6-SM Throttle Valve with Controller is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Comptech VQ-6-SM Throttle Valve with Controller will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $1,250 View Details and Photo
CONCEPTRONIC  HVC 70 SERIES Forced Convection Reflow Soldering System. High velocity/low volume gas management results in higher heat transfer rates at lower gas setpoint temperatures, superior gas segregation between zones and lower power consumption. 5 vertical heating regions. 24 in. wide belt. Heated Chamber: 70 in. L. PC controller. 440V, 3 Ph, 50/60 Hz, 66A. This used Conceptronic HVC 70 Series Forced Convection Reflow Soldering System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Conceptronic HVC 70 Series Forced Convection Reflow Soldering System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Conceptronic HVC 70 Series Forced Convection Reflow Soldering System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $15,000 View Details and Photo
CONTROL MICRO SYSTEMS  CMS UL-10 Semi-Automatic Manual Load CO2 Laser Marking System. Computer controlled laser and X-Y stage allow advanced parts marking from a simple user friendly screen. 10W sealed CO2 laser with 2 in. super high resolution lens assembly. Computer controlled 6 in. x 12 in. X-Y axes. CDRH Class 1 compliant enclosure with safety interlocked door. Mfg. 02/2001. This used Control Micro Systems CMS UL-10 Semi-Automatic Manual Load CO2 Laser Marking System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Control Micro Systems CMS UL-10 Semi-Automatic Manual Load CO2 Laser Marking System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Control Micro Systems CMS UL-10 Semi-Automatic Manual Load CO2 Laser Marking System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $35,000 View Details and Photo
CONTROL MICRO SYSTEMS  CMS5050Y In-Line PC Board Laser Marking System. Features 20W diode pumped internally cooled Nd YAG laser. 16 bit high precision galvanometer system. 10 in. x 10 in. high precision marking lens. LaserGraf 32 with Windows® 2000 OS. Flat panel computer monitor with Ergotron arm. Integrated barcode reader with database implementation. Adjustable width, in-line conveyor. Compliance with SMEMA specification 1.2. CDRH Class 1 enclosure. Fume extraction system. Date of Mfg.: 2004. This used Control Micro Systems CMS5050Y In-Line PC Board Laser Marking System will be sold refurbished and fully tested to meet the original manufacturers specifications unless it is listed in AS IS condition. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Control Micro Systems CMS5050Y In-Line PC Board Laser Marking System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Control Micro Systems CMS5050Y In-Line PC Board Laser Marking System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $21,000 View Details and Photo
COULTER  ZM Particle Counting and Sizing System with Sampling Stand. Accurate, sensitive particle counting and sizing. Dual threshold instrument for both research and quality control. Instantaneous monitoring. Measurement Range: 0.4 to 1200 micrometers overall size range. 0.4 to 336 micrometers for distributions to be expressed as volume against size. 120/240V, 1 Ph, 50/60 Hz. This used Coulter ZM Particle Counting and Sizing System with Sampling Stand will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Coulter ZM Particle Counting and Sizing System with Sampling Stand is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Coulter ZM Particle Counting and Sizing System with Sampling Stand will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $2,500 View Details and Photo
CREST  OC4-1218-HE Ultrasonic Cleaning Line. Unit has rotation mechanisms on each of the tanks that spin cages that hold parts to be cleaned. Parts Carrier Inside Dimensions: 5-3/8 in. x 5-3/8 in. x 12 in. System can also be used as a standard unit without these carriers. 3 Heated Ultrasonic Baths: 12 L x 18 in. W x 10 in. H. Hot Air Dryer: 12 in. L x 18 in. W x 10 in. H. 480V, 3 Ph, 50/60 Hz, 31A. This used Crest OC4-1218-HE Ultrasonic Cleaning Line will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Crest OC4-1218-HE Ultrasonic Cleaning Line is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Crest OC4-1218-HE Ultrasonic Cleaning Line will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $19,500 View Details and Photo
CREST  Ultrasonic Cleaning System Inline cleaning system. 208V, 3 Ph, 60 Hz. Configuration: Tank 1 - Heated Ultrasonic: 12 in. L x 18 in. W x 7-1/2 in. H. Tank 2 - Heated Ultrasonic: 12 in. L x 18 in. W x 7-1/2 in. H. Tank 3 - Heated Ultrasonic with spray: 12 in. L x 18 in. W x 10 in. H. Tank 4 - Heated Ultrasonic with spray: 12 in. L x 18 in. w x 11 in. H. Tank 5 - Spray Rinse: 12 in. L x 18 in. W x 8 in. H. Tank 6 - Dryer: 12 in. L x 18 in. W x 10 in. H. This used Crest Ultrasonic Cleaning System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Crest Ultrasonic Cleaning System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Crest Ultrasonic Cleaning System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $15,000 View Details and Photo
CREST ULTRASONICS  4HT-710-3 Stainless Steel Heated Ultrasonic Cleaning Tank with Controller. Genesis Tru-Sweep 4G-250-3 simultaneous multi-frequency ultrasonic generator. Vibra-Bar transducerized tank with Inside Dimensions: 10 in. L x 7 in.W x 10 in. D. 120V, 50/60 Hz, 8A. This used Crest Ultrasonics 4HT-710-3 Stainless Steel Heated Ultrasonic Cleaning Tank with Controller will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Crest Ultrasonics 4HT-710-3 Stainless Steel Heated Ultrasonic Cleaning Tank with Controller is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Crest Ultrasonics 4HT-710-3 Stainless Steel Heated Ultrasonic Cleaning Tank with Controller will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $2,500 View Details and Photo
CREST ULTRASONICS  Vacuum Dryer Drying chamber for ultrasonic cleaning line. For drying parts that trap water. Does not include vacuum pump. This used Crest Ultrasonics Vacuum Dryer will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Crest Ultrasonics Vacuum Dryer is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Crest Ultrasonics Vacuum Dryer will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $3,950 View Details and Photo
CVC  601 Four Target RF Sputtering System. PC controller. Target mounted in bottom of chamber for a sputter up configuration. 8 in. dia. cathodes. Circular 24.5 in. dia. rotating substrate holder. ENI RF generators. CTI cryopump with compressor and roughing pump.. $69,000 View Details and Photo
CVD  FURNACE TUBE Silicon Carbide Tube. 6-1/2 in. I.D. dia. x 72 in. L. This used CVD Silicon Carbide Furnace Tube will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand CVD Silicon Carbide Furnace Tube is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used CVD Silicon Carbide Furnace Tube will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $350 each View Details and Photo
CVD  WAFER TRAYS Furnace trays for 5 in. wafers. No. 52 - 18 Available. No. 16 - 16 Available. This used CVD Furnace trays for 5 in. wafers will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand CVD Furnace trays for 5 in. wafers is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used CVD Furnace trays for 5 in. wafers will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $750 LOT PRICE View Details and Photo
CYBEROPTICS  CYBERSCAN 200 Non-Contact Profile Measurement System. Uses laser triangulation to analyze two dimensional data. Non-contact measurement allows you to work with wet and fragile samples. PC controller analyzes data. Motorized stage. 120V, 60 Hz. This used Cyberoptics Cyberscan 200 Non-Contact Profile Measurement System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items. The second hand Cyberoptics Cyberscan 200 Non-Contact Profile Measurement System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit. The used Cyberoptics Cyberscan 200 Non-Contact Profile Measurement System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply.. $11,000 View Details and Photo

All items are covered by our 30-Day Right of Return and 3-Month Warranty unless otherwise stated. For full details of this policy, click here!

Note: All manufacturers names and models are used for illustrative purposes only. Any trademarks, tradenames or copyrights remain solely the property of the manufacturer. Unless otherwise stated, all items are used, and Bid-Service is not a manufacturer authorized representative. All images are copyright 2001-2011 Bid-Service LLC/Sci-Quip and may not be used for any purpose without prior written permission