|
Phone: 732-863-9500
FAX: 732-863-1255
Email:
Sales |
|
Have equipment
sitting idle?
We're always
in the market for quality high-tech equipment!
Click Here! |
| |
|
Mfg by First Letter:
A -
B -
C -
D -
E -
F -
G -
H -
I -
J -
K -
L -
M -
N -
O -
P -
Q -
R -
S -
T -
U -
V -
W -
X -
Y -
Z -
0-9 |
|
A few of the
manufacturers in stock:
Advanced Energy,
AMI-Presco,
Applied
Materials, Anritsu,
Balzers, Bausch
& Lomb, Blue-M,
CTI,
Dage,
Disco, Ebara,
Edwards,
ENI,
ESI,
Fluke, Hitachi,
HP,
Inficon,
Instron,
K&S,
Keithley,
Kepco,
Lambda, Lauda,
Leica,
Leitz,
Leybold,
Micromanipulator,
MKS,
MRC,
Nanometrics,
Neslab,
Nikon,
Olympus,
Perkin Elmer,
Prometrix,
Reichert,
Rucker & Kolls,
SemiGas,
Semitool,
Signatone,
Sorensen,
SSEC,
STI,
Strasbaugh,
SVG,
Tegal,
Tektronix,
Temescal,
Tencor,
Varian,
Veeco,
Verteq,
West Bond,
Wild,
Yield,
Zeiss |
Inventory in Stock, Manufacturer N
(No Nanometrics, no Neslab, No Nikon)
| Manufacturer/Model |
Description |
Info
|
|
|
NAPCO
5430 |
Dual Chamber CO2 Incubator. Temp. Range: +5 deg. C to 50 deg. C. CO2 range: 0 to 20 percent. Inside Dimensions: 17 in. L x 17 in. W x 27 in. H. 120V, 50/60 Hz, 8A.
This used Napco 5430 Dual Chamber CO2 Incubator will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Napco 5430 Dual Chamber CO2 Incubator Unit is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Napco 5430 Dual Chamber CO2 Incubator will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$2,950 |
View Details and Photo
|
|
NAPCO
CO2 6000 Model 6301FC-0 |
Dual Chamber Water Jacketed CO2 Incubator. Automatic precise humidity control range of 65 to 98 percent. Digital controls. Built in steam generators. IR sensor. Inside Dimensions: 17 in. L x 17 in. W x 23 in. H. 120V, 50/60 Hz, 9A.
This used Napco CO2 6000 Model 6301FC-0 Dual Chamber Water Jacketed CO2 Incubator will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Napco CO2 6000 Model 6301FC-0 Dual Chamber Water Jacketed CO2 Incubator is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Napco CO2 6000 Model 6301FC-0 Dual Chamber Water Jacketed CO2 Incubator will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply. .
$6,500 |
View Details and Photo
|
|
NAPLES COOMBE
SiV ALIGNMENT RIG |
No cables with system..
$3,950 |
View Details and Photo
|
|
NAPLES COOMBE
STAGE |
Stage Area: 3-3/4 in. x 3-3/8 in. DC motor. No controller or cables..
$495 |
View Details and Photo
|
|
NEW BRUNSWICK SCIENTIFIC
BIO FLO 4500 |
Benchtop 20 Liter Fermentor Bioreactor for Process Development through Small Scale Production Industrial fermentor/bioreactor. Multi-loop controller with touch screen interface for on screen entry of process control loops, sterilization cycles and calibration routines. Almost any auxiliary process device from sensors to biochemical analyzers can be integrated with the fermentor without need for additional hardware, software or a service technician. In fact, every facet of this compact system has been designed with efficiency in mind. An open frame design provides easy access to all piping, valves, regulators and filters; and assignable, peristaltic pumps with Easy-Load® pump heads speed tube loading. 200-240V, 1 Ph, 50/60 Hz.
This used New Brunswick Scientific BioFlo 4500 Benchtop 20 Liter Fermentor Bioreactor for Process Development through Small Scale Production will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand New Brunswick Scientific BioFlo 4500 Benchtop 20 Liter Fermentor Bioreactor for Process Development through Small Scale Production is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used New Brunswick Scientific BioFlo 4500 Benchtop 20 Liter Fermentor Bioreactor for Process Development through Small Scale Production will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply. .
$18,500 |
View Details and Photo
|
|
NEW BRUNSWICK SCIENTIFIC
BIO FLO 4500 |
Benchtop 20 Liter Fermentor Bioreactor for Process Development through Small Scale Production. Industrial fermentor/bioreactor. Multi-loop controller with touch screen interface for on screen entry of process control loops, sterilization cycles and calibration routines. Almost any auxiliary process device from sensors to biochemical analyzers can be integrated with the fermentor without need for additional hardware, software or a service technician. In fact every facet of this compact system has been designed with efficiency in mind. An open frame design provides easy access to all piping, valves, regulators and filters; and assignable, peristaltic pumps with Easy-Load® pump heads speed tube loading. 200-240V, 1 Ph, 50/60 Hz.
This used New Brunswick Scientific BioFlo 4500 20 Liter Fermentor Bioreactor for Process Development through small scale production will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand New Brunswick Scientific BioFlo 4500 20 Liter Fermentor Bioreactor for Process Development through small scale production is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used New Brunswick Scientific BioFlo 4500 20 Liter Fermentor Bioreactor for Process Development through small scale production will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$18,500 |
View Details and Photo
|
|
NEW BRUNSWICK SCIENTIFIC
BIO FLO 4500 |
Benchtop 20 Liter Fermentor Bioreactor for Process Development through Small Scale Production Industrial fermentor/bioreactor. Multi-loop controller with touch screen interface for on screen entry of process control loops, sterilization cycles and calibration routines. Almost any auxiliary process device from sensors to biochemical analyzers can be integrated with the fermentor without need for additional hardware, software or a service technician. In fact, every facet of this compact system has been designed with efficiency in mind. An open frame design provides easy access to all piping, valves, regulators and filters; and assignable, peristaltic pumps with Easy-Load® pump heads speed tube loading. 200-240V, 1 Ph, 50/60 Hz.
This used New Brunswick Scientific BioFlo 4500 Benchtop 20 Liter Fermentor Bioreactor for Process Development through Small Scale Production will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand New Brunswick Scientific BioFlo 4500 Benchtop 20 Liter Fermentor Bioreactor for Process Development through Small Scale Production is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used New Brunswick Scientific BioFlo 4500 Benchtop 20 Liter Fermentor Bioreactor for Process Development through Small Scale Production will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$18,500 |
View Details and Photo
|
|
NEW ENGLAND AFFILIATED
STAGE |
MCG motor P/N ID15000 manual knob and two 9 pin plugs. Stage Area: 3 in. x 2-5/8 in..
$750 |
View Details and Photo
|
|
NEW WAVE RESEARCH
QuickLaze |
Micro Machining Laser System. Two wavelength laser 266nm and 532nm. Designed to operate with both Mitutoyo FS60 and F3100 Series microscopes. There is no microscope with system. User must contact manufacturer for detailed instructions on connecting to a microscope. Multiple wavelengths give more precise control of specific applications. UV removes polyimide or nitride and green cuts large metal buses or small circuit lines. Superior pulse stability for uniform cuts and accurate results. 115V, 60 Hz.
This used New Wave Research QuikLaze Micro Machining Laser System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand New Wave Research QuikLaze Micro Machining Laser System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used New Wave Research QuikLaze Micro Machining Laser System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$12,000 |
View Details and Photo
|
|
NEWPORT
- |
Optical Breadboard Vibration Isolation Table. 2.25 in. thick sealed hole optical breadboard with 1/4 x 20 threaded holes 1 in. on center. Air leveling vibration isolation platform. Dimensions: 96 in. L x 48 in. W x 27.5 in. H.
This used Newport Optical Breadboard Vibration Isolation Table will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Newport Optical Breadboard Vibration Isolation Table is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Newport Optical Breadboard Vibration Isolation Table will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$3,500 |
View Details and Photo
|
|
NEWPORT
780 |
50W Quartz Halogen Lamp System. 110/220V, 50/60 Hz.
This used Newport 780 50W Quartz Halogen Lamp System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Newport 780 50W Quartz Halogen Lamp System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Newport 780 50W Quartz Halogen Lamp System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$425 |
View Details and Photo
|
|
NEWPORT
M-BGM160MS |
Manual Drive Goniometric Cradle with Encoder. Rotates about a transverse axis above the platform. Offers max. free access to the rotating part. Features 0.001 degree angular resolution. +/-45 degree transverse axis rotation..
$2,500 |
View Details and Photo
|
|
NEWPORT
MM3000-1 |
Motion Controller with 850G Linear Actuator. Single axis controller with an 850G linear actuator provides up to 50mm of travel..
$1,250 |
View Details and Photo
|
|
NEWPORT
MM3000-OPT |
Four Axis Motion Controller Driver. Stepper and DC motor combination. 90-240V, 1 Ph, 50/60 Hz, 4A.
This used Newport MM3000-OPT Four Axis Motion Controller Driver will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Newport MM3000-OPT Four Axis Motion Controller Driver is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Newport MM3000-OPT Four Axis Motion Controller Driver will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$750 |
View Details and Photo
|
|
NEWPORT
OPTICAL COMPONENTS |
Mirror and Rod Mounting Kit. Model Numbers: 2 - 34, 2 - 625 Series, 2 - 340RC, 1 - 600A-2R, 4 Posts.
This used Newport Optical Components Mirror and Rod Mounting Kit will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Newport Optical Components Mirror and Rod Mounting Kit is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Newport Optical Components Mirror and Rod Mounting Kit will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$650 |
View Details and Photo
|
|
NEWPORT
RS-4000 |
12 ft. Optical Breadboard Vibration Isolation Table. Sealed hole tuned damping 18 in. thick tabletop with 1/4 x 20 threaded holes 1 in. on center. Four vibration isolation legs. Table Dimensions: 144 in. L x 48 in. W x 36 in. H.
This used Newport RS-4000 12 ft. Optical Breadboard Vibration Isolation Table will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Newport RS-4000 12 ft. Optical Breadboard Vibration Isolation Table is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Newport RS-4000 12 ft. Optical Breadboard Vibration Isolation Table will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$7,250 |
View Details and Photo
|
|
NICOLET IMAGING
GR-X160 |
Failure and Process Analysis X-Ray System. Used for small component and circuit board inspection at ultra-high resolution. High-output, high resolution, variable wattage x-ray source, an 8-micron focal spot, a 5 axis manipulator and a touch panel screen for x-ray imaging source control. 220V, 1 Ph, 50/60 Hz, 15A..
$39,000 |
View Details and Photo
|
|
NICOMP
370 |
Particle Sizing System. Particle analyzer using dynamic light scattering for submicron particles. Size Range: 0.003 to 5 micrometers. Fully automatic analysis. Graphical presentation of data. Scattering intensity weighted, volume and number weighted evaluation of the sample particles. 115V, 60 Hz.
This used Nicomp 370 Particle Sizing System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Nicomp 370 Particle Sizing System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Nicomp 370 Particle Sizing System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$5,250 |
View Details and Photo
|
|
NILFISK CFM
3151N3A |
Three Phase Vertical Fixed White Line Vacuum. Designed for stationary suction during manufacturing and fabrication processes, and collect fine powder and dust directly from the source. Max. Airflow: 3300 l/m. Max. Water Lift: 2400 mmH2O. Noise Level: 67 DB/A. Capacity: 25 liters. 240/415V, 3 Ph, 60 Hz, CE. Mfg. Date: 2006. ONLY WHAT IS IN THE PHOTO.
This used Innov-X Systems XT-245S Portable Hand Held Metals Analyzer will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Innov-X Systems XT-245S Portable Hand Held Metals Analyzer is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Innov-X Systems XT-245S Portable Hand Held Metals Analyzer will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$1,250 |
View Details and Photo
|
|
NIPPON OZONE
QA-4MLC |
Ozone Generator. Date of Mfg.: 1995. 200V, 1 Ph, 50/60 Hz, 15A.
This used Nippon Ozone QZ-4MLC Ozone Generator will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Nippon Ozone QZ-4MLC Ozone Generator is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Nippon Ozone QZ-4MLC Ozone Generator will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$4,950 |
View Details and Photo
|
|
NITON
XLT 898 |
Portable Alloy Analysis Instrument. UNIT WANTED. BID SERVICE IS LOOKING TO PURCHASE..
$- |
View Details and Photo
|
|
NITON
XLT 898P |
Portable Non-destructive Light Element Analysis for Precious Metals Samples. Portable hand held tester with instantaneous results of sample composition. XRF analysis. Comes with stand for batch testing on a tabletop. Analytical performance and fast testing speed. Touch screen display. High performance x-ray tube. Set up for standard alloy analysis.
This used Niton XLT 898P Portable Non-destructive Light Element Analysis for Precious Metals Samples will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Niton XLT 898P Portable Non-destructive Light Element Analysis for Precious Metals Samples is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Niton XLT 898P Portable Non-destructive Light Element Analysis for Precious Metals Samples will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$17,000 |
View Details and Photo
|
|
NOAH PRECISION
WET BENCH |
Wet Bench with 270S Rinser/Dryer. STI 270S rinser dryer with PSC-101 controller, currently configured for 4 in. cassette. Quick Dump Rinse: 10 in. L x 7 in. W x 8 in. H. Heated Quartz Bath (no drain, NEW never used): 11 in. L x 7 in. W x 8 in. H. Magnehelic exhaust monitor. Overall Dimensions: 55 in. L x 34 in. W x 69 in. H.
This used Noah Precision Wet Bench with 270S Rinser/Dryer will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Noah Precision Wet Bench with 270S Rinser/Dryer is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Noah Precision Wet Bench with 270S Rinser/Dryer will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$15,000 |
View Details and Photo
|
|
NORCAL
3870-01160 |
Ion Tube Isolation Valve.
KF-25 flange..
$100 |
View Details and Photo
|
|
NORCAL
3870-01161 |
Valve.
KF25..
$100 |
View Details and Photo
|
|
NORCAL
3870-01162 |
Valve.
Air operated.
KF-50..
$100 |
View Details and Photo
|
|
NORCAL
80-198-131 |
Right Angle Air Actuated Valve.
4 in. ISO flange.
24 VDC valve..
$450 |
View Details and Photo
|
|
NORCAL
ESV-1502-NWB |
Manual KF40 Right Angle Valve.
This used Norcal Manual ESV-1502-NWB KF40 Right Angle Valve will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Norcal Manual ESV-1502-NWB KF40 Right Angle Valve is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Norcal Manual ESV-1502-NWB KF40 Right Angle Valve will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$100 |
View Details and Photo
|
|
NORD ENGINEERING
P-8-10-ETDC |
10 Spindle Production Polishing Machine. Precision optical polishing system. For lens blocks up to 8 in. dia. Overarm pressure for each spindle via air cylinder activated by a toggle switch. Each two spindles are driven by a common 1 hp motor. Oscillation is achieved by a gear reducer motor, adjustable eccentric which pivots the overarm. Spindle Speed: 50 to 600 rpm. 220V, 1 Ph, 60 Hz, 40A.
This used Nord Engineering P-8-10-ETDC 10 Spindle Production Polishing Machine will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Nord Engineering P-8-10-ETDC 10 Spindle Production Polishing Machine is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Nord Engineering P-8-10-ETDC 10 Spindle Production Polishing Machine will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$8,500 |
View Details and Photo
|
|
NORDSON
SELECT COAT SYSTEM |
Conformal Coating System. Provides high speed capability and precise film pattern definition and placement. Required film thickness is achieved in a single pass with little or no masking and with virtually no overspray. Coat system only, no curing oven. 120V, 60 Hz.
This used Nordson Select Coat System Conformal Coating System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Nordson Select Coat System Conformal Coating System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Nordson Select Coat System Conformal Coating System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$12,500 |
View Details and Photo
|
|
NOVA FINISHING SYSTEMS
Nova 253 SHDT |
Super Heavy Duty Tabletop Vibratory Mill. 1/4 cu. ft. machine can process the amount of parts you can get into a 3 in. x 3 in. x 3 in. box with a total weight of 12 lbs. 115V, 60 Hz, 8.8A.
This used Nova Finishing Systems Nova 253 SHDT Super Heavy Duty Tabletop Vibratory Mill will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Nova Finishing Systems Nova 253 SHDT Super Heavy Duty Tabletop Vibratory Mill is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Nova Finishing Systems Nova 253 SHDT Super Heavy Duty Tabletop Vibratory Mill will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$500 |
View Details and Photo
|
|
NSC
PA103 |
Plastic Mold Decapsulation System. Self contained system performs the definitive decapsulation of plastic mold IC packages. Uses fuming acid as etchant in a heated circulation system. 120V, 60 Hz.
This used NSC PA103 Plastic Mold Decapsulation System will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand NSC PA103 Plastic Mold Decapsulation System is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used NSC PA103 Plastic Mold Decapsulation System will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$8,500 |
View Details and Photo
|
|
NUAIRE
NH-425-600 |
Laminar Flow Hood. Inside Work Area: 72 in. L x 17 in. W (Tray Area). Overall Dimensions: 77 in. L x 32 in. W x 96 in. H. 115VAC duplex outlet. 115V, 60 Hz.
This used Nuaire NH-425-600 Laminar Flow Hood will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Nuaire NH-425-600 Laminar Flow Hood is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Nuaire NH-425-600 Laminar Flow Hood will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$3,500 |
View Details and Photo
|
|
