|
TEKTRONIX
1101 |
FET Probe Power Supply. The 110 Accessory Power Supply provides power for active probes such as the Tektronix P6201 and P6202A. The 1101 will provide power for up to four probes..
$200 |
View Details
|
|
TEKTRONIX
11302 |
Programmable Oscilloscope. W/11A32 Dual Channel Vertical Amp. The most versatile analog oscilloscope. Fully programmable via either IEEE-488 or RS-232C, with any RS-232 equipped PC. Up to 500 MHz bandwidth at probe tip. Menu driven touch screen operation. Automatic display of selected signals. Built-in 500 MHz Universal Counter/Timer with Counter View. Calibrated & Certified. No option. .
$1,750 |
View Details and Photo
|
|
TEKTRONIX
11302A |
Programmable Oscilloscope. Fully programmable via either IEEE-488 or RS-232C, with any RS-232 equipped PC. Up to 500 MHz bandwidth at probe tip. Menu driven touch screen operation. Automatic display of selected signals. Built-in 500 MHz Universal Counter/Timer with Counter View. Calibrated & Certified..
$1,750 |
View Details
|
|
TEKTRONIX
11402 |
1 GHz Digitizing Oscilloscope. 11A71 2 each DC-1GHz Signal Channel Amplifier. 11A72 DC-1GHz Dual Channel Amplifier. Live display of up to eight traces. High vertical and horizontal resolution. Versatility for a wide range of applications. Plug in modularity. Accurate, automatic measurements. Opt 1C Loop through BNC’s. Opt 2D Memory expansion. Opt 4D DMA controller. Calibrated & Certified..
$3,950 |
View Details and Photo
|
|
TEKTRONIX
11A71 |
Wideband Amplifier.
DC 1GHz Single Channel. DC offset can be set to 40 steps per division over a range of +/-10 div at sensitivities. 10 mV/Div to 1 V/Div Calibrated of Deflection Factor. +/-10 Div Offset. 50W Input Impedance. For 11000 or DSA 600 Series Mainframes. .
$650 |
View Details
|
|
TEKTRONIX
1240 |
Logic Analyzer Frame Version 3-2. Config. 1240D1-9CH/10nS acquisition card. Acquisition speeds to 100 MHz Async, 50 MHz Sync. Single probe demulti-plexing. dual time base triggering, acquisition & display..
$450 |
View Details
|
|
TEKTRONIX
1241 |
Logic Analyzer.
1240D9-9Ch/10ns acquisition card.
Firmware version 1-1. w/12RSO1.
8K RAM Pack..
$950 |
View Details
|
|
TEKTRONIX
172 |
Programmable Test Fixture.
Used with the Type 576 Curve Tracer.
It may be programmed to perform up to 11 different transistor, JFET, or diode tests without manipulating any of the controls..
$495 |
View Details
|
|
TEKTRONIX
178 |
Linear IC Test Fixture.
For use with 577 Curve Tracer System. Tests single, dual or quad.
Operational amplifiers, comparators, regulators, more..
$495 |
View Details
|
|
TEKTRONIX
2221 |
Digital Storage Oscilloscope.
60 MHz analog/digital bandwidth.
2mv-5V vertical sensitivity.
Cursors and readout.
Signal averaging.
One save reference memory location.
Option 10 GPIB interface..
$650 |
View Details and Photo
|
|
TEKTRONIX
308 |
20 MHz Portable Data Analyzer.
Four analyzers in one.
Up to 25 channels of word recognition triggering.
No input probe..
$495 |
View Details
|
|
TEKTRONIX
338 |
Logic Analyzer. Parallel and serial data acquisition. State and timing displays. 32 Channels up to 20 MHz, 16 Channels up to 50 MHz. Serial acquisition up to 19,200 bits/sec. Multilevel triggering. RS-232 Remote control interface. Internal nonvolatile memory for setups and reference data..
$450 |
View Details
|
|
TEKTRONIX
465 |
Portable Oscilloscope. 5 ns/div Sweep Rate with X10 Sweep Magnifier. Trigger View Versatile Trigger Selection. Bandwidth 100 MHz. High performance and light. weight for making complex measurements in the field. Light compact and rugged for portability and durability, yet it contains a large, bright 8 x 10 cm CRT. Operation has been simplified by single-function push-buttons, control knobs design, layout, and color-coordinated front panel. 2 Probes. .
$525 |
View Details
|
|
TEKTRONIX
475A |
Dual Trace Oscilloscope.
1 ns/div Sweep Rate w/X10 Sweep Magnifier. Trigger View Versatile Trigger Selection Weighs » 10.3 kg (22.75 lb). The 475A provides a 250 MHz bandwidth at 5 mV/div. .
$750 |
View Details
|
|
TEKTRONIX
485 |
Portable Oscilloscope. 350 MHz at 5mV/div NSEC/div sweep rate. 0 div/NSEC writing speed. Alternate switching between intensified and delayed sweeps. 1M ohms and 50 ohms input impedances. Calibrated & Certified.
$950 |
View Details
|
|
TEKTRONIX
5 CT1N |
5000 Series Plug-In.
Curve tracer tests semiconductor devices to 0.5W, 10 nA/.Div to 20 mA/div vertical deflection factors, 0.5V.Div to 20V/Div Horizonal deflection factors.
$450 |
View Details
|
|
TEKTRONIX
5103N/D10 |
Mainframe.
Single beam, 2MHz bandwidth..
$225 |
View Details
|
|
TEKTRONIX
5A15N |
5000 Series Plug-in.
DC-2 MHz BW, sensitivity of 1 mV-5 V/DIV.
Single trace amplifier..
$275 |
View Details
|
|
TEKTRONIX
5A18N |
5000 Series Plug-in.
DC-2 MHz BW, Sensitivity of 1 mV-5V/DIV.
Dual trace amplifier.
$150 |
View Details
|
|
TEKTRONIX
5A21N |
5000 Series Plug-in.
DC–1 MHz, 50 mV–5V/Division; current/voltage probe input..
$200 |
View Details
|
|
TEKTRONIX
5A48 |
5000 Series Plug-In.
BW DC to 50 MHz, 1 mV/-10V/div..
$200 |
View Details
|
|
TEKTRONIX
5B10N |
5000 Series Plug-in.
100 nSEC/DIV-5 SEC/DIV timebase.
Sensitivity of 50 mV/DIV & 500 mV/DIV.
Single sweep time base. .
$150 |
View Details
|
|
TEKTRONIX
5B12N |
5000 Series Plug-in.
100 nSEC/DIV-5 SEC/DIV timebase.
Sensitivity of 50mV/DIV & 500 mV/DIV. Sensitivity of 50mV/DIV & 500 mV/DIV,
Time base with dual and delayed sweep..
$150 |
View Details
|
|
TEKTRONIX
5B42 |
5000 Series Plug-In.
Delaying time base is designed for use in 5400-Series Mainframes. 10 ns/div to 5 s/div Calibrated time base. Single-sweep operation. Triggering to 60 MHz..
$200 |
View Details
|
|
TEKTRONIX
7323 |
Storage Oscilloscope Mainfame.
DC to 100 MHz BW, multimode storage, 1000 cm/uSEC stored writing speed. Long view time..
$450 |
View Details
|
|
TEKTRONIX
7514 |
Oscilloscope Mainframe.
Split screen, bistable storage.
DC-90MHz bandwidth..
$595 |
View Details
|
|
TEKTRONIX
7603 |
Oscilloscope Mainframe.
DC to 100 MHz, CRT readout of parameters, accepts three 7000 series plug-ins..
$295 |
View Details
|
|
TEKTRONIX
7613 |
7000 Series Mainframe. Storage oscilloscope mainframe, DC to 100 MHz BW. 4.5cm/us storage writing speed..
$200 |
View Details
|
|
TEKTRONIX
7633 |
7000 Series Mainframe. Storage oscilloscope mainframe, DC to 100 MHz BW, multimode storage, 1000 cm/uSEC stored writing speed. Long view time..
$450 |
View Details
|
|
TEKTRONIX
7834 |
Oscilloscope Mainframe.
Fast storage oscilloscope mainframe.
DC to 100 MHz BW, 2500 cm/uSEC stored writing speed..
$595 |
View Details
|
|
TEKTRONIX
7844 |
Dual beam oscilloscope mainframe.
DC to 400 MHz BW, 0.9nSEC rise time, dual beam readout, 1 nS/DID.
Max sweep speed..
$695 |
View Details
|
|
TEKTRONIX
7854 |
Waveform Processing Oscilloscope Mainframe. DC to 400 MHz BW, stores up to 400 MHz, up to 1024 point waveform, IEEE-488 COMP..
$1,495 |
View Details
|
|
TEKTRONIX
7A11 |
7000 Series Plug-In.
BW DC-to-50 MHz (7900 family).
Sensitivity 5 mV/DIV to 20V/DIV.
Built-in FET probe, 1M ohm input, internal probe storage..
$50 |
View Details
|
|
TEKTRONIX
7A12 |
7000 Series Plug-In.
BW DC-to-120 MHz (7900 family). Sensitivity 5 mV/DIV to 5V/DIV DC offset, 1M ohm input.
$50 |
View Details
|
|
TEKTRONIX
7A14 |
7000 Series Plug-In. Current amplifier designed for use with Tektronix P6021 and P6022 current probes. Provides calibrated deflection factors from 1 MA/DIV to 1 A/DIV..
$200 |
View Details
|
|
TEKTRONIX
7A16A |
7000 Series Plug-In.
Vertical plug-in, single trace amplifier which provides a bandwidth of 225 MHz in 7900 and 7100 series mainframes. 5 mV/DIV to 5 v/DIV calibrated deflection factors..
$75 |
View Details
|
|
TEKTRONIX
7A16P |
7000 Series Plug-In.
Amplifier plug-in.
Bandwidth of 225 MHz; manual and programmable operation.
Used in 7912AD programmable digitizer..
$150 |
View Details
|
|
TEKTRONIX
7A18 |
7000 Series Plug-In.
BW DC-to-150 MHz (7900 family).
Sensitivity 50 mV/DIV calibrated.
Easy to customize, low cost..
$50 |
View Details
|
|
TEKTRONIX
7A18A |
7000 Series Plug-In.
BW DC-to-75 MHz.
Sensitivity 5 mV/DIV to 5V/DIV.
Dual trace amplifier..
$50 |
View Details
|
|
TEKTRONIX
7A18N |
7000 Series Plug-In.
BW DC-to-75 MHz. Sensitivity 5 mV/DIV to 5V/DIV.
Dual trace amplifier, no readout..
$50 |
View Details
|
|
TEKTRONIX
7A19 |
7000 Series Plug-In.
BW DC-to-600 MHz (7104).
Sensitivity 10 mV/DIV to 1V/DIV.
Amplifier, Input R 50 ohms..
$350 |
View Details
|
|
TEKTRONIX
7A24 |
7000 Series Plug-In.
BW DC-to-400 MHz (7104 Family).
Sensitivity 5 mV/DIV to 1V/DIV.
Dual trace amplifier, input R 50 ohms..
$450 |
View Details
|
|
TEKTRONIX
7A26 |
7000 Series Plug-In.
BW DC-to-200 MHz.
Sensitivity 5 mV/DIV to 5V/DIV.
Dual trace amplifier, input R 1M ohms..
$50 |
View Details
|
|
TEKTRONIX
7A29 |
7000 Series Plug-In.
BW DC-to-1GHz (7104).
Sensitivity 10 mV/DIV to 1 V/DIV.
Amplifier, input R 50 ohms..
$495 |
View Details
|
|
TEKTRONIX
7B10 |
7000 Series Plug-In.
2nS to .2S/DIV sweep speeds, D time.
Delayed time base, variable trigger hold-off..
$350 |
View Details
|
|
TEKTRONIX
7B15 |
7000 Series Plug-In.
.2nS to .2S/DIV Sweep Rate, Delayed time measurements. Delaying time base, peak-to-peak autoranging..
$450 |
View Details
|
|
TEKTRONIX
7B53A |
7000 Series Plug-In.
5nS/DIV-5S/DIV Time Base, triggering to 100 MHz Dual time base, CRT readout compatibility..
$150 |
View Details
|
|
TEKTRONIX
7B70 |
7000 Series Plug-In.
2nS to 5S/DIV, triggering to 200 MHz.
Peak-to-peak auto triggering.
Single sweep operation..
$50 |
View Details
|
|
TEKTRONIX
7B71 |
7000 Series Plug-In. 2nS to 5S/DIV, 0 to 10X, delay mult, Triggering to 200 MHz. Delaying time base. Single sweep operation..
$50 |
View Details
|
|
TEKTRONIX
7B80 |
7000 Series Plug-In.
1nS to 5 S/DIV time base, triggering to 400 MHz Gives CRT readout of delayed time measurements..
$100 |
View Details
|
|
TEKTRONIX
7B85 |
7000 Series Plug-In.
1nS to 5 S/DIV time base, triggering to 400 MHz Gives CRT readout of delta delayed time measurements..
$100 |
View Details
|
|
TEKTRONIX
7B87 |
7000 Series Plug-In.
1nS to 5 S/DIV Time Base.
Triggering to 400 MHz. Pretrigger when used with 7854 time base..
$225 |
View Details
|
|
TEKTRONIX
7B90P |
7000 Series Plug-In.
500 pS to 500mS/DIV, programmable time base, 400 MHz. Trigger BW. Fully programmable plug-in used with 7912AD only..
$250 |
View Details
|
|
TEKTRONIX
7B92 |
7000 Series Plug-In. Triggering to 500 MHz. Time base rates of 500 psec to 0.2 sec/div. Dual timebase. Four display modes..
$250 |
View Details
|
|
TEKTRONIX
7B92A |
7000 Series Plug-In.
500 pS to 0.2 S/DIV Time Base.
Triggering to 500 MHz Dual time base, four display modes..
$250 |
View Details
|
|
TEKTRONIX
7D01 |
7000 Series Plug-In.
Logic analyzer plug-in requires P6451 probes (not included).
Choice of DF1 or DF2 display formatter..
$50 |
View Details
|
|
TEKTRONIX
7D10 |
7000 Series Plug-In.
Digital events delay unit; 1 to 207 events delay range; 1 nS resolution.
Lets you add delay to your 7D01 Logic Analyzer Trigger..
$400 |
View Details
|
|
TEKTRONIX
7D11 |
7000 Series Plug-In.
100 nSEC-1SEC delay time.
Digital delay, delay by time or events..
$250 |
View Details
|
|
TEKTRONIX
7D12 |
7000 Series Plug-In. 25 Hz makes most DM measurements. A/D converter M/F. Needs modules (M1, M2, M3) for operation..
$100 |
View Details
|
|
TEKTRONIX
7D13 |
7000 Series Plug-In.
DCV in four ranges to 1000V, DCA in four ranges to 2A.
A/D converter digital multimeter, measures DCV, DCA and resistance..
$100 |
View Details
|
|
TEKTRONIX
7D13A |
Oscilloscope Plug-in for 7000 Series Mainframe. DCV in four ranges to 500V, DCA in four ranges to 2A. A/D converter digital multimeter, measures DCV, DCA, and resistance..
$100 |
View Details
|
|
TEKTRONIX
7D14 |
7000 Series Plug-In.
100 mV sensitivity, 0.1-5 SEC display time. Frequency counter, frequency ratio and totalize 8-digit readout..
$150 |
View Details
|
|
TEKTRONIX
7D15 |
7000 Series Plug-In.
DC-225 MHz range, 10 pSEC maximum resolution. Universal counter/timer, time interval averaging..
$250 |
View Details
|
|
TEKTRONIX
7M11 |
7000 Series Plug-In.
75 ns time display. Selectable trigger out. 175 ps rise time..
$250 |
View Details
|
|
TEKTRONIX
7M13 |
7000 Series Plug-In.
Readout unit for convenient ID of photographed displays.
Automatic sequencing advance w/each camera exposure..
$50 |
View Details
|
|
TEKTRONIX
7S11 |
7000 Series Plug-In.
Sensitivity of 2 mV/DIV/200 mV/DIV.
Sampling unit, requires sampling heads and 7T11 PI (not included)..
$350 |
View Details
|
|
TEKTRONIX
7S12 |
7000 Series Plug-In.
45-pS TDR or 30-ps sampler.
Needs 1 of 6 sampling heads and 1 of 3 plug-in sources (not included)..
$500 |
View Details
|
|
TEKTRONIX
7S14 |
7000 Series Plug-In.
2mV/DIV to 0.5V/DIV deflection factor, DC to 1 GHz bandwidth.
Delayed sweep sampler, CRT readout..
$650 |
View Details
|
|
TEKTRONIX
7T11 |
7000 Series Plug-In.
0 pSEC–5 mSEC/DIV time base.
Sampling sweep unit requires 7S11 and sampling heads (not included)..
$350 |
View Details
|
|
TEKTRONIX
AF-501 |
TM Instrument Series.
Tunable bandpass filtering to 35 kHz.
Signal amplification to 50 kHz.
Sine-wave generation to 35 kHz..
$300 |
View Details
|
|
TEKTRONIX
AM-503 |
TM Instrument Series.
Display current signals on oscilloscope, requires current probe (not included)..
$275 |
View Details
|
|
TEKTRONIX
C30-A |
General purpose oscilloscope camera.
Variable magnification: 1.5 to 0.7.
Relative speed 1.0.
Maximum coverage 6.4 x 8..
$100 |
View Details
|
|
TEKTRONIX
C-30B |
General purpose oscilloscope camera for scopes that have 0.8 cm/div CRTs.
Highly reliable shutter and an f/1.9 lens..
$200 |
View Details
|
|
TEKTRONIX
C-31 |
Oscilloscope Camera.
Highest writing speed of C-30 Series with 0.5 magnification.
Relative speed 1.5..
$300 |
View Details
|
|
TEKTRONIX
C-53 |
Oscilloscope Camera.
Largest practical image of am 8 cm x 10 cm CRT display on Polaroid 3-1/4 in. x 4-1/4 in. pack film.
Electric shutter offers speed ranging from 1/60 to 4 sec..
$250 |
View Details
|
|
TEKTRONIX
C-58 |
Oscilloscope Camera.
Full size image (f/2.8, 1.0 magnification). Polaroid Pack Film and Roll Film Backs can be used..
$200 |
View Details
|
|
TEKTRONIX
C-59A |
Oscilloscope Camera.
Adjustable film & shutter speed.
Built-in viewer.
General purpose camera for CRTs up to 6-1/2 in.
Low cost. Interchangeable film backs..
$400 |
View Details
|
|
TEKTRONIX
CSA 803 |
Communications Signal Analyzer. High resolution and repeatability. 8.8 ps risetime. Highest sample rate (200 kHz) among sampling oscilloscopes. Modularity through sampling heads..
$2,500 |
View Details and Photo
|
|
TEKTRONIX
CT-5 |
High Current Transformer.
Pulsed currents to 50,000 A. 20 mA per Division Sensitivity. 1.5 in. dia. conductors. A clip-on high-current transformer which extends the measurement capability of Tektronix Clip-on Current Probes..
$400 |
View Details
|
|
TEKTRONIX
DAS 9109 |
9100 Series Digital Analysis System.
Set the industry standard for virtually all aspects of logic analysis.
Its modular mainframe accepts a wide assortment of both data
acquisition and pattern generation modules to fit your application needs.
3 DIFFERENT CONFIGURATIONS:
Options 03/02 $1,000 w/modules 91P16 - 1 ea., 91A08 - 2 ea.
Options 01/04 $1,000 w/modules 91A32 - 1 ea., 91AE04 - 1 ea., 91A04 - 1 ea., 91A08 - 1 ea.
Options 01/03/02 $1,000 w/modules 91P16 - 1 ea., 91A32 - 3 ea., 91A08 - 1 ea. .
$See Description for Pricing |
View Details
|
|
TEKTRONIX
DC-503 |
TM Instrument Series.
Frequency counter, range to 100 MHz, 7-digit display, 300mVPP input sensitivity..
$225 |
View Details
|
|
TEKTRONIX
DC-503A |
TM Instrument Series.
125 MHz Both A and B channels.
10 ps resolution in time interval.
Average with 108 averages.
Sensitivity - 20 mV RMS sinewave to 100 MHz..
$250 |
View Details
|
|
TEKTRONIX
DC-505A |
TM Instrument Series.
Direct counting to 225 MHz.
10 ns Clock Rate.
Two equal bandwidth channels for time measurements on narrow pulses..
$250 |
View Details
|
|
TEKTRONIX
DC-508 |
TM Instrument Series.
1 GHz counter 15nV sensitivity..
$495 |
View Details
|
|
TEKTRONIX
DC-509 |
TM Instrument Series.
135 MHz counter/timer w/20mV sensitivity and 10 nSEC single shot resolution.
Provides 8 different measurement functions..
$450 |
View Details
|
|
TEKTRONIX
DC-509 |
TM Instrument Series. 135 MHz counter/timer w/20mV sensitivity and 10 nSEC single shot resolution. Provides 8 different measurement functions..
$450 |
View Details
|
|
TEKTRONIX
DD-501 |
TM Instrument Series.
Digital events delay, delay to 99,999 events, pulse counting to 65 MHz..
$200 |
View Details
|
|
TEKTRONIX
DL-502 |
TM Instruments Series.
Digital latch. 16 channel latching capability, captures glitches as narrow as 5 ns at probe tips..
$200 |
View Details
|
|
TEKTRONIX
DM-501 |
TM Instruments Series.
Digital multimeter AC/DC volts and current, resistance/temperature, 4.5 digit..
$125 |
View Details
|
|
TEKTRONIX
DM-5010 |
TM Instrument Series. Plug In Programmable Digital Multimeter. 4 1/2 digit, Autoranging. Diode test. Comprehensive math functions: dB Calculations: Averaging, Offset, Scaling, Hi/Lo/Pass Measures DC voltage, resistance, true RMS AC or AC + DC voltage, and even AC or DC current through the use of an external shunt resistor and a scaling factor. .
$650 |
View Details
|
|
TEKTRONIX
DM-501A |
TM Instrument Series.
Multimeter. AC/DC volts and current, resistance temperature 4.5 digit display .05 percent DC accuracy..
$200 |
View Details
|
|
TEKTRONIX
DM-502A |
TM Instruments Series.
Digital multimeter measures DC/AC voltage and current, 0.1 percent DC voltage accuracy,
dB readings from -60 to +56 dB..
$175 |
View Details
|
|
TEKTRONIX
FG-5010 |
TM Instrument Series. Function Generator. Frequency range: 0.002 Hz to 20 MHz with 4-digit display. Amplitude: 20mV to 20V opened circuit, 10mV to 10V into 50W. Sine, square, triangle, pulse, and ramp waveforms. 10nsec Rise/Fall. 10 to 90 percent variable symmetry in 1 percent steps. Trigger, gate, counted burst. Phase lock with autoscan. AM, FM, and VCF..
$950 |
View Details
|
|
TEKTRONIX
MI-5010 |
TM Instrument Series.
Multifunction interface, the MI 5010 and MX5010 and appropriate M50 series plug-ins make a complete multifunction interface system..
$100 |
View Details
|
|
TEKTRONIX
P6046 |
Differential Probe Kit. 1000:1 CMRR at 50 MHz (DC-Input Coupled). 500:1 CMRR at 50 MHz (AC-Input Coupled). +/-250 V max voltage with 10X attenuator. Dual probe tips for greater CMRR at high frequencies. Bandwidth: DC to 100 MHz (-3dB). Rise time: 3.5ns or less..
$500 |
View Details
|
|
TEKTRONIX
P6201 |
DC-900 MHz FET Probe.
An active FET probe that provides unity gain and DC to 900 MHz bandwidth. The low probe-tip capacitance permits coupling of high-frequency signals to an oscilloscope with minimum loading on the circuit being tested. Plug-in attenuator heads provide higher input resistance and reduced input capacitance..
$295 |
View Details
|
|
TEKTRONIX
P6202 |
FET Probe Kit w/AC Power Source. Self-contained power supply. DC offset. High input impedance through freq. range. Small probe size. Rugged. Bandwidth: DC to >500 MHz. Rise time: 0.7 ns or less. Attenuation: 10X within 4 percent..
$450 |
View Details
|
|
TEKTRONIX
P6202A |
FET Probe Kit. DC offset, small probe size. High input impedance through freq. range. Rise time: < 0.7 ns. Bandwidth: >500 MHz. Attenuation: x10. Input resistance: 10 mW. Input capacitance: 2 pF. The P6202A derives its power from the probe power jack on many Tek scopes, or an 1101A Power Supply (not included).
.
$550 |
View Details
|
|
TEKTRONIX
PG-501 |
TM Instrument Series.
Pulse Generator.
Rep rate 5 Hz-50 MHz, Risetime 3.5 ns, output 5V p-p into 50W.
$250 |
View Details
|
|
TEKTRONIX
PG-502 |
TM Instrument Series.
Pulse Generator.
Rep rate 10 Hz–250 MHz Risetime in S, output 5VPP into 50W.
$950 |
View Details
|
|
TEKTRONIX
PG-506 |
TM Instruments Series.
Three squarewave output modes.
10 Hz to 1 MHz. Direct readout of oscilloscope deflection error..
$650 |
View Details
|
|
TEKTRONIX
PG-507 |
TM Instrument Series.
Pulse generator.
50 MHz high-performance, dual outputs w/tracking level controls.
3.5-ns rise/fall times, normal or complement output..
$475 |
View Details
|
|
TEKTRONIX
PS-5010 |
TM Instrument Series.
Programmable triple power supply, dual floating supplies 0V to 32V, to 0.75A (1.6A to 15V).
Logic supply +4.5 to 5.5V to 3A 0.5 percent accuracy..
$650 |
View Details
|
|
TEKTRONIX
PS-503 |
TM Instrument Series.
Triple output power supply, +5V at 1A, or 0 to +20V at 1 A (in high power compartment of TM504 or percent M506) or 400mA in any standard frame..
$165 |
View Details
|
|
TEKTRONIX
R5110 |
Low frequency oscilloscope. 2 MHz bandwidth, large CRT 6.5 in. diag..
$250 |
View Details
|
|
TEKTRONIX
RG-501 |
TM Instrument Series.
Ramp generator, provides ramp duration from 10MS to 10 SEC w/ramp amplitude.
Continuously variable from 50 mV-10V either polarity programmable triple power..
$250 |
View Details
|
|
TEKTRONIX
S-1 |
7000 Series Sampling Head.
Sampling head 1 GHz BW, rise time of 340 pSEC, low random noise..
$100 |
View Details
|
|
TEKTRONIX
S-2 |
7000 Series Sampling Head.
Bandwidth DC–4.6 GHz, rise time 75 pS, impedance 50 ohms.
$400 |
View Details
|
|
TEKTRONIX
S-3A |
7000 Series Sampling Head.
1 GHz BW, rise time of 350 pSEC or less..
$50 |
View Details
|
|
TEKTRONIX
S-4 |
7000 Series Sampling Head.
Sampling head 25 pS rise time, DC to 14 GHz, 50 W input impedance.
Variable DC offset allows signals between +1V and -1 V limits to be displayed at 2 mV/DIV..
$950 |
View Details
|
|
TEKTRONIX
S-50 |
7000 Series Sampling Head. Pulse generator head. 25 pS pulse rise time; 400 mV pulse amplitude; 100 nS pulse width. For use 2/7S11, 3S2, 3S5, 3S6, 7S11, 285, and 286..
$350 |
View Details
|
|
TEKTRONIX
S-52 |
7000 Series Sampling Head.
25-ps Rise Time. 200 mV into 50 W. 50-W Source. Pretrigger output..
$500 |
View Details
|
|
TEKTRONIX
S-6 |
7000 Series Sampling Head.
11.5 GHz BW, rise time 30 pSEC, loop through input..
$650 |
View Details
|
|
TEKTRONIX
SI-5010 |
TM Instrument Series.
Programmable scanner, provides switching and routing of up to 16 high frequency input/output signals.
TTL compatible..
$100 |
View Details
|
|
TEKTRONIX
TDS 8000 |
Digital Sampling Oscilloscope. DC to 50 GHz bandwidth. Exceptional trigger jitter and horizontal timebase stability. Modular architecture. Up to 8 channels acquisition. High resolution and measurement repeatability. Comprehensive, accurate, automatic measurement system. Intuitive user interface - large display (10.4 in.) Microsoft Windows based graphical user interface. Calibrated & Certified..
$4,950 |
View Details and Photo
|
|
TEKTRONIX
TDS210 |
Digital Real Time 60 MHz Oscilloscope. 60 MHz bandwidth. LCD display. 1 GS/s on each channel sample rate. Two channel plus external trigger. No probes with scope.
This used Tektronix TDS210 Digital Real Time 60 MHz Oscilloscope will be sold refurbished and fully tested to meet the original manufacturers specifications. Due to the very large inventory Bid Service warehouses at its 150,000 Sq. Ft. facility, we do not begin to refurbish an item until a purchase order has been placed. We recommend you talk to a salesperson to find out what the approximate lead time may be on that item or items.
The second hand Tektronix TDS210 Digital Real Time 60 MHz Oscilloscope is owned by us and stored in our Freehold, NJ facility. You are welcome to visit and inspect our used equipment in person. We recommend you call for an appointment first so that we can organize your visit.
The used Tektronix TDS210 Digital Real Time 60 MHz Oscilloscope will come with both our 30 day money back policy and our 90 day parts warranty to ensure your full satisfaction with your purchase excluding any shipping charges. If you purchase this tool at a reduced price or any product we have listed in AS IS condition, the 30 day right to return and the 90 day warranty will no longer apply..
$395 |
View Details and Photo
|
|
TEKTRONIX
TDS-744A |
Digitizing Oscilloscope. 500 MHz Bandwidth. 4 channels. Sampling 2 GS/s 1 channel, 1 GS/s 2 channel, 500 MS/s 4 channel, 1 Mv to 10 V/div sensitivity. High resolution color monitor. 25 automatic measurements. 3.5 in. DOS format floppy disk. Waveform Pass/Fail testing GPIB, RS 232 and Centronics interface. Calibrated & Certified.
$4,950 |
View Details and Photo
|
|
TEKTRONIX
TG-501 |
TM Instrument Series. Time mark generator, provides marker outputs from 1nSEC to 5 SEC in a 1-2-5 sequence. Direct readout of oscilloscope timing error. Ext. triggering output..
$995 |
View Details
|
|
TEKTRONIX
TM-5006 |
Power module/mainframe.
Holds up to 6 TM5000 series modules.
GPIB programming for TM5000 series modules..
$500 |
View Details
|
|
TEKTRONIX
TM-501 |
TM Instrument Series.
Power module/mainframe.
Holds 1 TM500 plug-in..
$175 |
View Details
|
|
TEKTRONIX
TM-503 |
TM Instrument Series.
Power Module Mainframe.
Holds 3 TM 500 series plug ins.
High power compartment supplies power for scopes and power supplies..
$250 |
View Details
|
|
TEKTRONIX
TM-503A |
TM Instrument Series.
Power module mainframe.
Holds 3 TM 500 series plug ins.
High power compartment supplies power for scopes and power supplies..
$275 |
View Details
|
|
TEKTRONIX
TM-504 |
TM Instrument Series.
Power module/mainframe.
Holds 4 TM500 series plug-ins
and has a high power compartment for scopes and power supplies..
$275 |
View Details
|
|
TEKTRONIX
TM-506 |
TM Instrument Series.
Power module/mainframe.
Holds 6 TM500 series plug-ins and can supply power to any TM500 series plug-ins..
$275 |
View Details
|
|
TEKTRONIX
TM-515 |
TM Instrument Series.
Power module/mainframe.
Holds 5 TM500 plug-ins.
A sturdy traveler mainframe..
$275 |
View Details
|