PANASONIC -
AG-6720 VCR:
Time Lapse Recorder.
Horizontal resolution of 400 lines.
Double fine slow-motion recording and playback.
Complete range of time lapse modes: VHS and S-VHS in which audio signals can be recorded, the intermittent recording (for 24-, 48-, 72-, 120-, 180-, 240-, 480 hour or 1 shot modes).
Inventory#:
27274
ANATECH -
Phase III:
Semiconductor Thermal Meas. Unit.
Controller Only.
Phase III Thermal Tester.
Sense current settings on back of system, 10, 50, 100, 1000 microamp.
BNC connectors on back, Samp.V, Dev.V, Temp, Samp.TRIG. Dev.I + -.
Front panel, Internal supply ADJ, Device pwrInt. - Ext, current source/sink,
current polarity +/-,Switching time ADJ, device supply, Aux thermocouple.
115 V, 60 Hz, 4A.
Inventory#:
32577
KLA -
1007:
Automatic Wafer Prober.
100 wafer capacity reduces loading/unloading requirements.
The system accepts wafers from 3-6 in. in dia.
Probe Tip Polishing: Programmable probe
tip polisher uses a fused ceramic disk.
Utilities:100/115/200/220/240 VAC, 50/60 Hz., 2.2 KVA
XY Table: Standard travel 7.3 x 15.0 in.
Speed: 4.9 in./sec.
Resolution: .01 mil.
Accuracy including alignment: .5 mil.
Repeatability: +/-.1 mil.
XY index setting:.1 to 9999.9 mils.
Vertical Max. travel: 590 mils.
Adaptive range: 352-531 mils.
Programmable overdrive: 0-8 mils.
Rotational: Chuck rotation +/- degrees.
Angular resolution: .0005 degrees.
6 in. chuck.
Sold As Is.
Inventory#:
29137
DAGE -
BT 25:
Automatic Wirebond Tester.
Offers the benefit of full microprocessor control, to ensure 100 percent testing of up to 15,000 discrete points per substrate. Easily programmed using alphanumeric keyboard and liquid-crystal display, the Series 25 meets the requirements of MIL-STD-883 with a speed of (less than 2 sec. per wire), precision (±5 micro-meters), and consistency +/- 10 micro-meters).
Inventory#:
27304
SOFTEX -
ISV-100W:
X-Ray Imaging System.
8 x 6 in. X-Y stage.
X-Ray TV camera.
Hitachi monitor.
100 KVP source.
Sony digital printer.
120V, 50/60 Hz.
Inventory#:
26876
MCT -
LS 2600:
Lead Scanner.
The Model LS 2600 is a lead scanner for 600 mil devices. The 2600 scanner can test up to 5,000 devices per hour . A sort verification system on the 2600 compares the actual output reservoir selected with the original category signal selection command from the scanner module.
Inventory#:
30762
MCT -
2608:
Elevated Temp. I.C. Handler.
Gravity feed with Air assist.
Input: 13 heated reservoirs (24 in. long) accepts any single track stick.
Output: 8 reservoirs (24: long) accepts any single track A or B frame stick.
Dip size: 600 mil. 8 programmable sort categories (sort signal can be +/-TRUE at 3.5V min. to 30V max. w/5 msec min. width). Handler supplies test ready signal to the tester at +/-TRUE.
Homogeneous gold platinum alloy contacts: 0.050 ohms. Interlead capacitance of 5 pf (kelvin) 3 pf (non Kelvin). Temp. control range is from ambient to 125 deg. C +/- 12 deg. C.
Requires: 200 CFH Air at 20 PSI; 105-125V, 50/60 Hz at 18A max., weight 125 lbs.
Inventory#:
23617
CAM/ALOT -
1414:
Liquid Dispensing Machine.
The system can be configured for a variety of SMT applications and is an excellent tool for R&D and process calibration.
Dispensing area: 14 in. x 14 in.
Lead screw drives on all three axes.
Travel X & Y Axes: 14 in. (350mm).
Travel Z Axis: 2 in. (50mm).
Resolution: .001 in. (25m).
Repeatability: +/-.002 in. (+/-50m). Speed: 10 IPS (250mm/sec).
Dispensing rate: 13,000 dots/hr. Dot placement accuracy: +/-.003 in. (+/-75m) at 3 Sigma.
115V, 60Hz, 10A. Has camera option, NO PC or software. Sold As Is.
Inventory#:
23702
COMMONWEALTH SCIENTIFIC -
Millatron 8000 (38J):
Ion Milling Machine.
High throughput-high uniformity ion mill.
38cm source capable of high current extremely uniform ion beams for maximum etch rates.
32 in. dia. stainless steel chamber.
Inventory#:
28815
SOLITEC -
RA OPTIMIST:
Ultrasonic Developer.
Handles wafers up to 8 in.
Currently set for 8 in.
LCD display.
5-1/4 floppy.
Each bowl has 2 primer and 1 ultrasonic develop transducer.
2 robot arms (1 for each bowl) move wafer from cassette to bowl, then back.
Inventory#:
23300
PHILIPS -
PW1410/70:
X-Ray Fluorescence Spectrometer.
With XRG-3000 X-Ray Generator and Data processor.
Scanning range: Scintillation counter from 0 deg. to 116 deg. (2 theta).
Flow counter from 0 deg. to + 148 deg. (2 theta).
Reading accuracy: 0.005 deg. (2 theta).
Reproducibility: 0.003 deg. (2 theta).
Maximum sample thickness: 42mm (1 5/8 in.).
Maximum sample diameter: 2 in. (50.8 mm).
Sample rotation: 60 rpm.
Power Requirements - Voltage: 195V min. to 245V max.
Frequency: 60 Hz.
Output Characteristics - Voltage range: Output is variable
from 15kV to 60kV at 80 mA DC or less as limited by 3kW max. output power.
Output voltage: Output voltage is full wave rectified and filtered.
Inventory#:
25410
PERKIN ELMER -
SERIES 100:
Single Piston Pump.
A reciprocating, single-piston pump designed for the entry level chromatographer and for routine dedicated analyses. The flow rates between 0.5 and 5.0 mL/minute, up to a maximum backpressure of 6000 psi. The Series 100 is also equipped with a fixed high pressure limit switch, set to stop the pump when the backpressure exceeds 6000 psi.
Specifications -
Solvent System: Single Solvent.
Flow Control: Manual Turnscounting dial with a locking device.
Precision: Greater than 1 percent at 2 mL/min. with methanol.
Maximum Rated Pressure: 6000 psi.
Maximum Viscosity: 500 Centipoise.
Hydraulics: Single piston 1/8 in. dia. 1/4 in. stroke.
Dimensions: 16cm (6-1/4 in.) H x 26.4cm (11-3/8 in.) W x 21.7cm (8-1/2 in.) D.
Weight:6.14kg (13lbs. 7.5oz.).
220VAC (50/60 Hz) 36W.
Inventory#:
46203
SVG -
8020SSC/8030IR:
Dual Track Single Sided Wafer Cleaner with IR Tunnel.
Can handle wafers from 3 to 5 in.
Single sided nylon brush cleaning.
(3) solvent/DI dispense nozzles (1) nitrogen blow off.
208V, 60 Hz.
Inventory#:
25742
DAINI SEIKOSHA -
SFT/156:
Fluorescent X-Ray Measurement System.
X-Y Stage: 3 in. x 3 in.
Travel Z.
Adjustment: 1.3 in. Min.
Measurement area: .005 in.
Inventory#:
34297
SEMICONDUCTOR SYSTEMS -
PBCS31/3:
Dual Track System Coat and Develop.
Can be configured to process wafers from 3 in. to 6 in. in dia.
Track no. 1 Cassette - Bake - Coat - Bake - Cassette.
Track no. 2 Cassette - Bake - Coat - Bake - Cassette.
Inventory#:
26885
NOTE: By
default this page opens to ALL items being displayed. You can select to view
clearance items in a specific category - but not all categories contain
clearance items.
IMPORTANT:
All clearance items are sold "as-is" with no 30 Day Right of
Return. Items are not tested unless otherwise noted. Please contact us for any
further information.
Category Search Help! Navigation Help! Note: If buttons appear above this means there is more
than one page of results. Use the buttons to navigate from page to page. Note: After viewing large image - use browsers BACK button or the CLOSE button
in the window to return!
All items are covered by our 30-Day Right of Return and 3-Month Warranty
unless otherwise stated. For full details of this policy,
click here!
Note: All manufacturers
names and models are used for illustrative purposes only. Any trademarks,
tradenames or copyrights remain solely the property of the manufacturer.
Unless otherwise stated, all items are used, and Bid-Service is not a
manufacturer authorized representative. All images are copyright 2001, 2002,
2003, 2004, 2005, 2006, 2007 Bid-Service LLC/Sci-Quip and may not be used
for any purpose without prior written permission
